Date   

Re: compact 5 cnc tool change HELP

Richard Engbersen
 

I second that following those M06 instructions makes my C5 CNC tool changer works flawlessly.

Cheers,
Richard

Op ma 27 apr. 2020 om 17:13 schreef Dieter <d.kirchesch@...>

Hello,

First download all files related to the Compact 5 CNC in the "Files Section" and read them carefully, everything is well explained.
There is a chapter "Positioning of toolholder" about  tool offsets in the operating manual.

The instruction M06     T ool.Number    X-Value     Z-Value     make the offsets of the tool you measured before.

Dieter






Re: compact 5 cnc tool change HELP

@harvard5
 

none of the manuals I have explaine the tool turret


Re: compact 5 cnc tool change HELP

@harvard5
 

I have the manuals but still dont understand how to set the tools


Re: compact 5 cnc tool change HELP

Dieter
 

Hello,

First download all files related to the Compact 5 CNC in the "Files Section" and read them carefully, everything is well explained.
There is a chapter "Positioning of toolholder" about tool offsets in the operating manual.

The instruction M06 T ool.Number X-Value Z-Value make the offsets of the tool you measured before.

Dieter


compact 5 cnc tool change HELP

@harvard5
 

I have a compact 5 cnc for awhile (about 10 yrs and never used it ) and have never found out how to do a tool change with the tool  turret. I'm about ready to sell it because it's no good to me if I cant change tools. 
I understand how to set the RH turning tool but how do you reference the other tools from that one.
If I have a 1" dia part 1" out from the chuck and I scratch off on x and z set the  dro to zero for both x and z then bring my tool to positioned x 1000 z -1000 as a starting point (tool change position) .
 what do i do to set the next tool.
do I now reset the dro to zero in the new position or leave it set to x 1000 z-1000?
I rotate the turret to the next tool.
then scratch the part with that tool and write down the the number on the dro after the move?
go back to the tool change position and do it all for the next tool?
do I use G90 G 92 or G 91 to set things up?
                                                                                     thanks for the help Im very lost and confused 
                                                                                                                                          Bill


Re: PCMill 100 - Motor & Encoder info

atsel02.ell@...
 

Hello Simon,

Did you manage to get the spindle working with the Allen Bradley Ultra 3000 with tool changing ,is it easy to set it up in mach?
I have a PC Mill 125 with the main board broken and I was able to make the vfd smoke while trying to figure out its pins 🤦‍♂️, and I don't  want to spend money unless I'm sure it's gonna work.

Thanks for all the information of the topic


Re: A6A 116001 card

Dieter
 

Hello Greg,

I'm also looking for quite some time, but nothing found about the CPU or DNC-Board.
For the values one don't need a schematic, one can read all values on the components.
Is your DNC defective, perhaps I may help.

I made some modifications on my CPU and DNC without schematics:

new RAM for 990 instructions, only 1 EPROM, changed inputs for outputs on DNC for M04 instruction etc.

Dieter


zero workpiece emco F1P

vasile evis brinzei
 

 
 
 
 
 
 
 
 
good evening, kindly, I need help with a recently purchased emco F1P milling machine.
I would like to try a gcode generated with Gibbscam, but I have no idea how to find the zero workpiece.
 
 
 


Re: Retrofit emco pc turn 50

zachary mcdonald
 

I am also retrofitting my lathe right now. i was able to use all the original parts except for the vfd. im using all the original drivers and breakout-board too.


On Sat, Mar 14, 2020 at 4:29 PM <finistairsoft@...> wrote:
Hello everybody ! I'm french and I have an emco pc turn50 since few weeks without computer/software/card. I want use mach3 (USB) and retrofit this lathe, but keep maximum original parts.
I have already a 0.55kw VFD, and I'm looking to save originals motors. I found on aliexpress 5 phases drivers :
I don't know if it is ok for original motors...
 
Maybe someone with a retrofit pc turn 50 can help me ?
 
Thank you !
 
Eric


Re: Retrofit emco pc turn 50

mauri.harkonen@...
 

Hi,
I have got Emco 50 PCTurn but not ISA RS-485 Interface PC Mill Turn Y4A013000 0404TN card.
Are they similar in EMCO 50 and EMCO 5 turn and also in 50/5 milling machines? Do you know where to get one?
I would like to update this user interface, so if you are solving this problem, I am interested.

I am located in Finland.
Mauri


A6A 116001 card

 

I am looking for a schematic which shows the values of the components (resistors, capacitors, etc.) on a A6A 116001 pc card from a Emco compact 5 CNC lathe.  Can anyone direct me to the right place on the group?  Thank you.

Regards, Greg


Ang.:Re: [Emco-CNC-Users] DC spindle driver hack

Tony Schalburg <tonyschalburg@...>
 

Hi Francois
The idea was to reuse stepper drivers and spindle driver.
I already hacked the stepper drivers, left with the spindle driver. Why scrap somthing that is working fine, and why spend lot of money, when things are working fine.
What im asking for, is not advises on what to buy, but a way to hack the spindle driver.
I have seen it done, so thats why i ask in this forum, if anyone knows, how its done, and would help with drawings and diagrams, i would be happy.

På søn., den 5. apr. 2020 klokken 21:53, FRANCOIS JACQUES
<jacq62@...> skrev:
Bonsoir tony, bonsoir à tous

 J'ai aussi une VMC 100 à rétrofiter, ma commande est complète à part le pilote de la broche manquant et qui est hors de prix, tu vas conserver la TM02? je n'ai jamais réussi à bouger les axes, la machine ne semble pas conserver les données MSD ,pourtant la pile est bonne. Je pars sur Mach3 avec des pilotes d'axe Chinois pour conserver les moteurs 5 phases et un variateur DC de la même origine pour éviter de changer le moteur de broche sinon j'envisagerai le montage d'un servomoteur AC genre DELTA. N'hésite pas à me demander tout renseignement utile.
A+
Jacques.

Garanti sans virus. www.avast.com

Le dim. 5 avr. 2020 à 21:07, Ludvig Friberg <ludvig.friberg@...> a écrit :
Well I used the transformer and that chunky capacitor with a rectifier for powersupply.

Den sön 5 apr. 2020 kl 20:46 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi
Im in progress of retrofitting my emco vmc100.
Would like to know if anyone here have managed to hack the original dc driver, and make it run with mach3.
Would love to get some drawings and input on my project.
Hope someone can help me ASAP

Tony
Denmark


Garanti sans virus. www.avast.com


Re: DC spindle driver hack

FRANCOIS JACQUES
 

Bonsoir tony, bonsoir à tous

 J'ai aussi une VMC 100 à rétrofiter, ma commande est complète à part le pilote de la broche manquant et qui est hors de prix, tu vas conserver la TM02? je n'ai jamais réussi à bouger les axes, la machine ne semble pas conserver les données MSD ,pourtant la pile est bonne. Je pars sur Mach3 avec des pilotes d'axe Chinois pour conserver les moteurs 5 phases et un variateur DC de la même origine pour éviter de changer le moteur de broche sinon j'envisagerai le montage d'un servomoteur AC genre DELTA. N'hésite pas à me demander tout renseignement utile.
A+
Jacques.

Garanti sans virus. www.avast.com

Le dim. 5 avr. 2020 à 21:07, Ludvig Friberg <ludvig.friberg@...> a écrit :
Well I used the transformer and that chunky capacitor with a rectifier for powersupply.

Den sön 5 apr. 2020 kl 20:46 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi
Im in progress of retrofitting my emco vmc100.
Would like to know if anyone here have managed to hack the original dc driver, and make it run with mach3.
Would love to get some drawings and input on my project.
Hope someone can help me ASAP

Tony
Denmark


Garanti sans virus. www.avast.com


Re: DC spindle driver hack

Ludvig Friberg
 

Well I used the transformer and that chunky capacitor with a rectifier for powersupply.

Den sön 5 apr. 2020 kl 20:46 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:

Hi
Im in progress of retrofitting my emco vmc100.
Would like to know if anyone here have managed to hack the original dc driver, and make it run with mach3.
Would love to get some drawings and input on my project.
Hope someone can help me ASAP

Tony
Denmark


DC spindle driver hack

Tony Schalburg <tonyschalburg@...>
 

Hi
Im in progress of retrofitting my emco vmc100.
Would like to know if anyone here have managed to hack the original dc driver, and make it run with mach3.
Would love to get some drawings and input on my project.
Hope someone can help me ASAP

Tony
Denmark


WTB: Disk Image for PC Turn 50

Baschwar@
 

Hi, 

I have an Emco PC Turn 50 with a dead harddrive. 
I'm wondering if anyone could make and share a disk image in the cloud of their working PC hard drive so I could get this unit up and running. 
Or if someone would be willing to clone their machine to a new drive I'd be willing to pay for the cost of a drive and shipping. 
I contacted Emco and they did not offer a solution for the software. 

We intended to retrofit at some point but I wanted to get it working as is to make sure going the route of the retrofit would be worth the effort. 
If not, we're contemplating selling as-is or doing a part out if there's any interest. 

Brad


Ang.:Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

Tony Schalburg <tonyschalburg@...>
 

Hi Ludvig 

Yes the dsc328 and dcs343 are similar

Whatsapp tony schalburg/+4581494034
Or messenger, same name
So we can arrange something.

Tony

Ps im no good in norwegian, sorry😁

På ons., den 1. apr. 2020 klokken 18:49, Ludvig Friberg
<ludvig.friberg@...> skrev:
DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com


Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Juan, I have one Transistorsteller Leistungensteil F1V470000. It weighs 1.6 kg so it will cost 30 euros to send it.

Den ons 1 apr. 2020 kl 18:52 skrev Ludvig Friberg <ludvig.friberg@...>:

Hahn, can you have a look at the pictures? I have 7 steppermotordrivers, at least 3 of them I know are working since the machine was working when I bought it and I ran it for a bit with the original controller.


Den ons 1 apr. 2020 kl 18:49 skrev Ludvig Friberg <ludvig.friberg@...>:
DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com


Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Hahn, can you have a look at the pictures? I have 7 steppermotordrivers, at least 3 of them I know are working since the machine was working when I bought it and I ran it for a bit with the original controller.


Den ons 1 apr. 2020 kl 18:49 skrev Ludvig Friberg <ludvig.friberg@...>:

DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com


Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:

Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com