Date   
WTB: Disk Image for PC Turn 50

baschwar@...
 

Hi, 

I have an Emco PC Turn 50 with a dead harddrive. 
I'm wondering if anyone could make and share a disk image in the cloud of their working PC hard drive so I could get this unit up and running. 
Or if someone would be willing to clone their machine to a new drive I'd be willing to pay for the cost of a drive and shipping. 
I contacted Emco and they did not offer a solution for the software. 

We intended to retrofit at some point but I wanted to get it working as is to make sure going the route of the retrofit would be worth the effort. 
If not, we're contemplating selling as-is or doing a part out if there's any interest. 

Brad

Ang.:Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

Tony Schalburg
 

Hi Ludvig 

Yes the dsc328 and dcs343 are similar

Whatsapp tony schalburg/+4581494034
Or messenger, same name
So we can arrange something.

Tony

Ps im no good in norwegian, sorry😁

På ons., den 1. apr. 2020 klokken 18:49, Ludvig Friberg
<ludvig.friberg@...> skrev:
DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Juan, I have one Transistorsteller Leistungensteil F1V470000. It weighs 1.6 kg so it will cost 30 euros to send it.

Den ons 1 apr. 2020 kl 18:52 skrev Ludvig Friberg <ludvig.friberg@...>:

Hahn, can you have a look at the pictures? I have 7 steppermotordrivers, at least 3 of them I know are working since the machine was working when I bought it and I ran it for a bit with the original controller.


Den ons 1 apr. 2020 kl 18:49 skrev Ludvig Friberg <ludvig.friberg@...>:
DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Hahn, can you have a look at the pictures? I have 7 steppermotordrivers, at least 3 of them I know are working since the machine was working when I bought it and I ran it for a bit with the original controller.


Den ons 1 apr. 2020 kl 18:49 skrev Ludvig Friberg <ludvig.friberg@...>:

DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:
Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

DSC00343 and DSC00345 is the same card. Just forgot to include the phone with the weight in one of them

To me they look very similar the DSC00328 and DSC00343.

When I bought this machine there was really two machines and the previous owner had taken out all the cards from one of the controllers so I have double of some stuff.

How can I send you one of the cards? With some packaging I guess it will weigh 1kg and be 25x25x15cm it will cost 250 DKK. If is 2 kg its 300DKK.


Den ons 1 apr. 2020 kl 18:37 skrev Tony Schalburg via groups.io <tonyschalburg=yahoo.dk@groups.io>:

Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony
Denmark


På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Ang.:Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

Tony Schalburg
 

Hi Ludvig 

I could use the boards on pictures :
DSC00343 and DSC00345
For my emco vmc100

Tony

På ons., den 1. apr. 2020 klokken 18:03, Ludvig Friberg
<ludvig.friberg@...> skrev:
here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Sharp.Shooter
 

Control panel looks superb, but it has a few different buttons than mine L I am not sure it would fit on my 220P.

Thanks

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Wednesday, April 1, 2020 6:03 PM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

 

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

here is a list of all the stuff. And a lot of pictures. How is it best to send? Can you guys figure out who needs what and how to send it?

1 piece
f1v470000
Transistor leistungsteil

1 piece
r3d436001
G. Netzteil

1 piece
R3d415000
Datacontroller

1 piece
R3d415001
Datacontroller


2 piece
R3d414001
Axiscontroller

2 piece
Machineninterface
r3d425001

1 piece
Mystery card many relays very similar to 22c
419, e0115, 077, 066

1 piece
R3d419000
Videokarte

1 piece
Transistorsteller Reglerkarte

4 pieces Schrittmotor driver
R3d413000

3 pieces Schrittmotor driver
R3d413001

1 piece
Crt monitor

1 piece
Y1b619000
Graphics controller

1 piece
22c many relays

1 piece
Serial communication card
Y1b610000

1 piece
Controlpanel
 

Den ons 1 apr. 2020 kl 16:16 skrev Juan Bedialauneta <juan@...>:

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Juan Bedialauneta
 

Hahn,

We are at a school in Bilbao, Spain. We have a V100 with M1 control but with one of the cards damaged. It has this references on it:

           Transistorsteller Leistungensteil

           F1V470000

           07C 30V1 420

We would like to replace it with yours if possible

Thanks a lot

           

 

De: Emco-CNC-Users@groups.io <Emco-CNC-Users@groups.io> En nombre de Ludvig Friberg
Enviado el: 2020(e)ko martxoaren 31(a), asteartea 23:40
Para: Emco-CNC-Users@groups.io
Asunto: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Ok people, I have taken all the stuff home and I will go through it and weigh and photograph all electronics. 

Den ons 1 apr. 2020 kl 15:57 skrev Sharp.Shooter <stefan.cefi.kovacevic@...>:

Thanks Ludvig, just the front panel. Motors are interesting too, but I am afraid that the DHL postage to Serbia would be enormous for them.

Cheers

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Wednesday, April 1, 2020 8:12 AM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

Ok I will take pictures of all the parts and see how big and heavy the box would be. Are you interested in the motors, crt screen?

 

Ludvig

 

Den ons 1 apr. 2020 kl 05:47 skrev Sharp.Shooter <stefan.cefi.kovacevic@...>:

I would be interested in front panel keypad, my is in a really bad shape Jof course if Hahn doesn’t need it, he answered first.

Thanks

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Tuesday, March 31, 2020 11:40 PM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Sharp.Shooter
 

Thanks Ludvig, just the front panel. Motors are interesting too, but I am afraid that the DHL postage to Serbia would be enormous for them.

Cheers

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Wednesday, April 1, 2020 8:12 AM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

Ok I will take pictures of all the parts and see how big and heavy the box would be. Are you interested in the motors, crt screen?

 

Ludvig

 

Den ons 1 apr. 2020 kl 05:47 skrev Sharp.Shooter <stefan.cefi.kovacevic@...>:

I would be interested in front panel keypad, my is in a really bad shape Jof course if Hahn doesn’t need it, he answered first.

Thanks

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Tuesday, March 31, 2020 11:40 PM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Tony Schalburg
 

Hi
I could use one of the circuit boards inside, its marked 23C.
It have 4 relays, 8 fuses on it. Its defect, the 1 i have, so my vmc100 is not working.
I live in denmark

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Ok I will take pictures of all the parts and see how big and heavy the box would be. Are you interested in the motors, crt screen?

Ludvig

Den ons 1 apr. 2020 kl 05:47 skrev Sharp.Shooter <stefan.cefi.kovacevic@...>:

I would be interested in front panel keypad, my is in a really bad shape Jof course if Hahn doesn’t need it, he answered first.

Thanks

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Tuesday, March 31, 2020 11:40 PM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

Sharp.Shooter
 

I would be interested in front panel keypad, my is in a really bad shape Jof course if Hahn doesn’t need it, he answered first.

Thanks

Stefan

 

From: Emco-CNC-Users@groups.io [mailto:Emco-CNC-Users@groups.io] On Behalf Of Ludvig Friberg
Sent: Tuesday, March 31, 2020 11:40 PM
To: Emco-CNC-Users@groups.io
Subject: Re: [Emco-CNC-Users] Giving away Emcotronic m1 from vmc-100

 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.

 

 

 

Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-

I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

hahn@...
 

Ludvig-
I will take whatever you have for electronics if it's already disassembled. The drives on my machine are R3D413001 and similar numbers. I can send a UPS tag for shipping if you tell me your address and the size of the box and weight.
Hahn Rossman

Re: Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

I can take some photos of the keypad. What do you mean with inside of the control? It is disassembled so a lot of cards in boxes. Do you have the name of the card you are looking for? The heavy metal case and all that is gone. I have all electronics here for a while now before I have to recycle that too.



Den tis 31 mars 2020 kl 23:00 skrev <hahn@...>:

Ludvig-
I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Re: Giving away Emcotronic m1 from vmc-100

hahn@...
 

Ludvig-
I'm super interested! Can you take a photo of the keypad and also the inside of the control so I can compare with what is on my 220p? Thanks!
Hahn Rossman
Rossmancycles.com

Giving away Emcotronic m1 from vmc-100

Ludvig Friberg
 

Hi! I hav disassembled a M1 unit since I now use modern control. It looks new, comes from a school. I can post stuff if you pay for shipping. I live in Norway so probably cheaper with small parts. Anyone interested? 

Re: FOR SALE: I have a PC 125 Mill complete that I would like to sell.

marty_in_mesa
 

He says Dayton, OH toward the end of his email


On Thu, Mar 19, 2020, 11:56 AM Ricky G. via Groups.Io <lablue79=yahoo.com@groups.io> wrote:
Where are you located ?

What's the liknk?

PM me
r8derz79@...
Rick
909 480 9136
On Thursday, March 19, 2020, 11:13:26 AM PDT, <kevinkcam@...> wrote:


Hello,
        I have not been a reqular poster, despite having some Emco stuff.
I hope I am within the rules of the forum here in posting this. If not. I apologize.

I have a complete PC Mill 125 for sale.
It has the manuals, a little bit of tooling.
I got it a few years ago from a school nearby where I live.
Like many of these, it clearly had an easy life. There is no mechanical wear evident or damage to the mechanical parts.
I never ran it. I planned to put it in a home shop and do a retrofit on it. I got busy with other things.

The machine is near Dayton Ohio, USA. It is not under power, but you can come see it if you are interested.
You can pick it up or I could possibly deliver it within a few hundred miles, if that helped. (would need to cover costs.)
Reasonable offers will be considered.

Thanks for looking,
      Kevin

Re: FOR SALE: I have a PC 125 Mill complete that I would like to sell.

Ricky G.
 

Where are you located ?

What's the liknk?

PM me
r8derz79@...
Rick
909 480 9136

On Thursday, March 19, 2020, 11:13:26 AM PDT, <kevinkcam@...> wrote:


Hello,
        I have not been a reqular poster, despite having some Emco stuff.
I hope I am within the rules of the forum here in posting this. If not. I apologize.

I have a complete PC Mill 125 for sale.
It has the manuals, a little bit of tooling.
I got it a few years ago from a school nearby where I live.
Like many of these, it clearly had an easy life. There is no mechanical wear evident or damage to the mechanical parts.
I never ran it. I planned to put it in a home shop and do a retrofit on it. I got busy with other things.

The machine is near Dayton Ohio, USA. It is not under power, but you can come see it if you are interested.
You can pick it up or I could possibly deliver it within a few hundred miles, if that helped. (would need to cover costs.)
Reasonable offers will be considered.

Thanks for looking,
      Kevin