Re: PCmill50 programming errors
toggle quoted messageShow quoted text
Here you go, the complete file. I have already roughed out the .368 diameter it is at .388. This was as received by the programmer. I made a few minor edits mainly to the Z retract values. Some of the feeds & spindle speeds are way too slow.
On Sunday, June 28, 2020, 09:51:53 PM EDT, rcflyer <sclcl082@...> wrote:
It would be helpful to see the code, at least the parts which err. If Fanuc 0M control, it doesn't support greater than 180° in a segment. If you are programming 180° moves, you can't use the radius callout reliably, and must use IJK.
On Sun, Jun 28, 2020 at 1:45 AM <michel@...> wrote: