Re: Threading - no rpm in display

Jan
 

Thanks a lot, Dieter! I'll try with some adjustments to go with lower rpm.
The lathe was modified by the pre-owner, it has a servo-motor controlled by a frequency converter, but I can use the original pot for adjusting the spindle speed. Good thing, but probably this caused the loss of the indicator in cnc-mode. And maybe a bit too much power for this little lathe (2.2 kW...)
If it works with less speed I'll leave the electronics at the moment, just for safety reasons. But great info, thank you!

Jan

Join Emco-CNC-Users@groups.io to automatically receive all group messages.