I need a RRC-1258Mk11s to use on my K3, anyone?

Anyone take a guess at what these data bursts are on 20m every 30-40kc. Sounds like a swooshing noise on ssb. On some other bands also. 73 Mike R KE5GBC 7! Absolutely Awesome

My friend K4BAI is having a problem with his KPA1500. A couple weeks ago he heard a pop. At the time he wasn't even transmitting. It was just powered on. After that point it wasn't putting out any out

Unwanted accessory. Does not include the FM filter. I'm travelling to Friedrichshafen tomorrow if it helps anyone. £300 cheers, Tel/G4MKP

I’m hoping someone on the reflector can tell me what I’m missing. I want to use my K3 with N1MM+ to play voice keying and record on-the-fly. I have found and successfully gone through a few different

I recently picked up a K3 and have been trying to set it up for digital use using a Signalink USB and WSJT. I have the Signalink connected to the real panel of the radio using the line in, line out, a

I recently picked up a K3 and have been trying to set it up for digital use using a Signalink USB and WSJT. I have the Signalink connected to the real panel of the radio using the line in, line out, a

I also have this issue. Have ordered a replacement DSP board through eBay. I tried replacing the audio amp IC, and the CODEC.. no bueno. The problem seems to come over time. I can listen to a strong s

I have a spare KBPF3 broadband band pass filter available $220 mailed to your door US only Steve W9HBH w9hbh @ arrl.net

Hi Guys, I am just about to purchase a Elecraft K3 and with it now being End of Life so to speak I was wanting to know what else I can install in the unit once I have it and while our local supplier s

In the it never hurts to ask, I would like a P3 to go with my K3 (who wouldn't?) If it comes from Canada I wont have to deal with customs. 73 to all

Hello fellow K3'ers... Last night my P3 display started intermittently flashing on/off rapidly. The entire display would rapidly flash on/off, including the border lines, function key menu, waterfall,

Hi, Has anyone here wired an Icom SM-2 to a K3 and had luck with this? Any surprises in this? -- 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI

I had been using my K3S on FT8 for quite a while, with no problems. I run about 15 Watts out into a KPA-500. Today I wanted to try some SSB operation, so I switched from "Data" mode to "SSB" mode and

Hi, Made a 6m J-pole antenna the other day... the SWR in the KAT-500 showed SWR 1.63. OK not to bad on first try, I dialed in manual mode and made a tune... still 1.63 and showing BYPASSED.. ! Hmm.. w

If anyone has an SP3 or 4 they don't need, I could find it a home here in Wales email on the QRZ address Thanks Trevor MWØTDZ

KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500 Digital Display Unit for Elecraft's KPA500 amplifier: - - WITH REPAIR COST AND DOWN TIME FOR REPAIRS, THIS WILL K

I was thinking of adding a second W2 to my system. I use the W2 Utility to watch the meter on my desktop rather than looking over at the meters which are across the room. I've been able to run multipl

I have just acquired my K3, with quite a few options and the heil mh2 mike. I am mostly a cw operator. My question is how to set up the EQ on the radio. thanks de ve3mrx ve3mrx@...

I gave away several synthi's as I "thought" I did not need them, sigh. For the original K3, I need everything to make mine dual receiver, so: synthi receiver cables. de KG9H kg9hfrank@...