Good evening everyone, I am Looking for : GENERAL COVERAGE RX BAND PASS FILTER BOARD FOR K-3 Elecraft product number is : KBPF3A Please let me know if you have any extra, sitting in you radio without

I am using a k3 with tigertronics usb and running wsjyx for ft8. In wsjtx not getting a reading on the db scale. Looking for recommended k3 settings Sent from AT&T Yahoo Mail on Android

For sale a used DVR board for the K3/K3S. Complete with H/W and photocopied instructions. Have pictures if you need. Asking $200 shipped. 73, Paul, W6IBU

My K3S was damaged during FD 2022. Autopsy showed diode D28 cracked and burned. Replaced it with identical part. Rig came up on 40 CW, but though some audio noise, no signals heard. Rig will not power

This was originally reported on the KPA 1500 group. I don't think it is an amp issue K3S. CW QSO. On receive, the input intermittently attenuates. The noise level drops. The trace on the P3 showing th

*A friend has a defective W2 with two HF/6M 2KW sensors. One of the sensors cannot be "found" by the display unit search feature. The other can be "found" OK but will not produce power or SWR readings

For sale is a KSYN3AUPG synth upgrade for the K3. No cables or manuals, just the board, which is hard to find. Asking $345 shipped. 73, Paul, W6IBU

New sealed in package upgrade to your P3 to add SVGA. I no longer need since I sold the target P3. Asking $345 shipped. 73, Paul, W6IBU

Hi, all, I'm trying to get the whole signal for WTWW 5085 (listen only.) I have a 13 kHz filter in now, but the K3 limits AM bandwidth to 5 kHz, and WTWW's signal is at least 2 kHz wider than that. Is

When I got this K3S new a few years ago, the LP 6M TX gain cal did not calibrate and eventually it calibrated at "52000 kHz TXGain LP 121". I didn't want to send it back, and that's why I kept calibra

Excellent condition K3 with many updates from the factory. It includes: Subreceiver with .5 and 2.7Khz filters Main has five roofing filters: 6.0, 2.8, 1.8, .400 and .250 KBPF3A 100 watts ATU KXV3 int

Digital Display Unit for either Elecraft's KPA1500 or KPA500 amplifier: - Allows you to place a display at you operating position! Place the display next to your radio or computer monitor. Making it v

Can anyone tell me the SMD part # for the UI on the KI03 and where to order it? The one on my board shows sn75c1406 g4 which doesn't show up on any datasheet, I've found others that are close except f

I have a P3 VGA board. I have the P3 set on one band that is perfect for my use. Is there a way to clone that setting to all other bands? 73, Lou KE1F

Hello, There is a new version of Win4K3Suite available. This release has the following fixes: Use of Ham Radio Deluxes DM780 did not transmit. Some people had issues with the QRZ login in the terminal

I realize this is a huge stretch on here but anyone have experience setting up transmit EQ for 6-8kc AM. Do you even want more than 6kc wide. Also getting forward modulation and alc issues. I suppose

contact me off line at: jacantor9 @ gmail.com Jeff / K1ZN

Hello fellow K3'ers... Last night my P3 display started intermittently flashing on/off rapidly. The entire display would rapidly flash on/off, including the border lines, function key menu, waterfall,

My K3S was damaged during FD. Autopsy revealed D28 was cracked. Replaced it with an identical part. Rig comes up on 40 cw, but can not change frequency hear audio, but no signals and rig will not turn

I've found that I like to do a little SWLing on AM, but the 2.1 kHz filter cuts off too much. Does anyone know where to get a 6 kHz filter for the K3? Per the manual, they must exist. I've looked all