K3/100F K3 100W Transceiver - Factory Assembled S/N 1707 KAT3-F K3 ATU - Factory Assembled KFL3A-400 K3 400 Hz, 8 Pole Filter KFL3A-2.8K K3 2.8 kHz, 8 Pole Filter KUSB Universal Serial Bus Adapter KSY

Due to people wishing to sit next to us and throw carriers ... I am moving us a small distance away... AND there is the chance someone will be there ... 75m is funny that way Please take note of 3.825

I downloaded the KX3 utility into my laptop this morning. It's a WIN 10 system. I also have the KXUSB cable that came with the KX3 when i bought it 2 years ago. After downloading the utility program i

Wondering whether anyone else had experienced a 3.3 to 3.5mm adapter breaking apart IN the paddle Jackson a K3? The tip and ring portion of the adapter are now stuck inside the paddle jack on th at ra

This an old microphone but it was causing me issues. The mic element was wired so that it was always connected. That allowed shack noises to trip the Tx on in the VOX position. i rewired the mic eleme

I’m contemplating a http://www.q5signal.com/ 144MHz transverter to use with my K3S. Does anyone have experience with these devices? I’m thinking of buying the 75W version. Some questions, if you can a

Digital Display Unit for Elecraft's W2 Watt Meter: With digital read out the Display Unit takes the guess work out of the LED light bar. https://www.eham.net/reviews/view-product?id=14820 Digital Disp

Just developed an issue this past weekend during the CW contest. I now get an ERR KP1 message on 20-10 meters. I bought the K-Pod less than 2 months ago, and this is the first I've noticed this issue.

Purchased a used K3 (excellent condition), studied the "Owner's Manual" (Revision D10), installed "K3 Utilities" and updated the firrmware to 05.67 (the latest). Bellow the Temperatur vs. Time I logge

Many apologies for the missing Net Control. about 15 mins before it was to start, I kicked 80 meter on and had a mindblowing SWR.. went out and had a branch come down on it. I tried to make the 40 wor

It seems like several months ago Elecraft sent a note about some add-ons that were no longer available, including the 2 meter transverter. I am at the point whre I would really like to add 2 m to my K

I want to ask if the tech support contact form on the Elecraft site does work. I tried to order the "Rubber Switch Array", part # E100200 to solve my problems with intermittent action of the front pan

We will see if they let us have it... 73 Paul KB9AVO

Does anyone know where I can find a schematic for a K3/0-Mini? Dan K4FN

If anyone from Europe need I have spare elecraft filters for K3: KFL3A-1.8K SSB KFL3A-200 CW/DATA Price 110 Eur for filter + shipping. HNY 73 de Zoran S58L

So... looking for a little help here. My K3 has worked perfectly since I built it around 2012. I installed a subreceiver about a week ago and everything worked great. Several days of use later I had r

I'm thinking of someday putting the KPA1500 in another room to isolate the fan noise, but I'd like to retain the tight integration with the K3. Is there a maximum length spec for the AUX cable? (In my

GE, Old age or crumbling mind syndrome is has caught up with me again. A month or so ago I move equipment around on my desk and am have no luck getting FSK RTTY TX-keying. I have a MicroKeyer (origina

I am having trouble locating an Elecraft E980263 cable. It is the DB-15 cable that connects the Elecraft K3/0 Mini to the RRC-1258. Elecraft and HRO do not have them. I have the info to make one but w

FS: K3S, and P3 with dual receivers 2700 and 500 Hz IF filters in both Receivers. This station has mostly be used as a remote and seen little time in normal use. Asking $2500 if interested please emai