Hi folks, after super strong station signal hit my K3, the audio from speaker is distorted and it resonates somehow (with cover?). Also band noise has been distorted somehow at first and band noise au

Make certain that both VFOs are in the same mode, I.e., both ssb, both cw, etc. 73, Steve AA4V

Just getting the station back on line after a 3 year medical absence and lots to go back and re-learn. Tore the station completely apart to carpet and paint the room and decided to just keep it simple

Hello, This problem has me. First I have 2 K3's using them more than 10 years. Recently, when operating my K3 with the second RX installed I cannot generate RF out, irrespective of band, when "Sub" is

Looking to buy a K3/0 working in good condition

I want to thank all that replied (W4TV, KY5G, K4TAX, NS2N, K6MKF, & W1SKU). I pulled up the voltage in the display and it was reading 13.6V. Hit the key and shut down occurred. I was going to move ove

My K3/10 (early generation not updated to K3S) has KXV3A and K144XV - I am finally getting ready to use the transverter port(s) on the KXV3A. Problem is that the kit building manual does not define th

Upgrading FW on my older K3 (4866) using USB/serial converter. Same setup used successfully for many years. Converter continues to work with other devices so suspect laptop and converter are good (con

If anyone from Europe need I have spare elecraft filters for K3: KFL3A-1.8K SSB KFL3A-200 CW/DATA Price 110 Eur for filter + shipping. HNY 73 de Zoran S58L

KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, and KPA1500 Digital Display Unit for Elecraft's W2 Watt Meter: With digital read out the Display Unit takes the guess work out of th

I listed it on QTH.com Pickup only. SF Bay Area. 73 N6AF

Hi, I bought my K3 used about 10 years ago and I can't remember what options are installed in the radio. Is there any software that provides an inventory of what is installed? 73 Randy, K7AGE

Hmm as I wait for the K4, I have a bug I never had before.. Setup K3S in Data A mode for WSJT-X FT8 Mode ... transmitted, then it did not pop back to Data A..... went to SSB.. What am I missing? Tnx P

Elecraft People! Can I use an RS232 splitter on the K3 RA232 Jack and simultaneously run both the P3 AND CAT control with WSJT-X? Much appreciated! Bob AA6VB

I would like to wish healthy, safety and happy New Year 2021 to all over here. 73 - Petr, OK1RP

FS: P3 with 2000W directional coupler option. No VGA board. Includes manual and all necessary cables to enable it to function with a K3s or K3. Original owner. $775 including shipping. Email good at Q

My KPA1500 is giving me trouble with Fault: Low Gain Ratio-1, Ratio-2 and Ratio-5. This is at low temp 28C on the low bands. Anyone know what this means? I sent a note to the factory twice but no repl

Hi folks, I have the problem that I can't use the function LO-Cut and HI-Cut in CW. It is just not working. If I try to use the knob it shows "FC *0.70" and I can not change it. What is the problem? I

I recently added an XV144 to the shack and love it so much I would like to add an XV432 as well. PayPal must be an acceptable way to pay. Thanks Merry Christmas and a Blessed Hanukkah Sandor KG4FET

Someone on the list gave me a chance to look at a couple of dead KIO3B boards. What I found was interesting, to say the least. Here is the list of defective devices I found on each board: Board #1: Re