I am having trouble locating an Elecraft E980263 cable. It is the DB-15 cable that connects the Elecraft K3/0 Mini to the RRC-1258. Elecraft and HRO do not have them. I have the info to make one but w

FS: K3S, and P3 with dual receivers 2700 and 500 Hz IF filters in both Receivers. This station has mostly be used as a remote and seen little time in normal use. Asking $2500 if interested please emai

Hi, I didn't see this mentioned in the lists, so I am reporting: For those of us who have amplifiers that glow in the dark (actually, the tungsten filaments of 3/500, 572 or 811 cause a bright white l

After hearing Eric talk about the K4 filtering (https://www.youtube.com/watch?v=OoMoJddbFyI&t=1221s) and the phase shift problems with narrow crystal filters, I wondered if you could run the K3S with

Hello. My K3 was showing the CW text decode but not anymore. I guess I must have inadvertently changed something. When I press and hold CW/Text Dec it shows "Threshold" and "WPM Speed". CWT shows up a

Set up: Flex 6500 with KAT500 & KPA500 using Elecrafts recommended settings When I have the Tuner in By-Pass Mode for this antenna with a low SWR, even when making small changes in the frequency, the

Looking for a W2 VHF/UHF coupler. Email me if you have one to sell. Keith, KV5J Email good on QRZ.

My Heil headset has 3 plugs - 1/4" mono plug (mic), 3.5mm stereo plug (phones), and a 3.5mm mono plug (footswitch). The phone plug is already plugged into the rear panel stereo phones jack. In order t

Please contact me off reflector wb6bee@... Don

KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, and KPA1500 Digital Display Unit for Elecraft's W2 Watt Meter: With digital read out the Display Unit takes the guess work out of th

I'm trying to set up N1MM and my new K3S to play WAV files. When I click on the F1 key to send the CQ message, it appears as though the K3S is transmitting. However, I do not hear any audio, which I w

Andy, if you still have it, can you confirm it also works with the K3S? Can you send a pic of the ends? Where did you get it from? I’m a new K3S owner and would like to use that rear panel mic jack! T

Folks, my K3S arrived yesterday and I am excited and happy to be a part of the K3 family! Working 3 state QSO parties this weekend to get my feet wet. I look forward to utilizing the forum and learnin

For sale. Nicely equipped factory built K3. See my ad on QRZ.com Search K9ON in swapmeet. 73, Greg K9ON

Hello, I have a guy trying to sell me a used KAT500, SN 0296. He sent me an actual photo with the SN clearly showing. Also in the photo is KPA500 SN 0702. Something seems suspicious. I did a Google im

The K3S manual says "Bias must be turned on for electret mics (e.g. MH2, MD2, Proset). It must be off for dynamic mics (e.g. Heil mics using HC4 or HC5 elements)." Does the Heil comment include Heil h

Just my thought but enough of this on either side. Please stop. Sent from Mail for Windows 10 Brad WZ0O

Andrew Thanks it arrived to today. Just what I was looking for Mel ________________________________ Sent: Sunday, January 31, 2021 1:50 PM To: elecraft-k3@groups.io <elecraft-k3@groups.io> Subject: [E

When combined with a PC internal or external sound card and free software (PowerSDR, NaP3 etc), you can use this to create a Panadapter for your K3/S up to 192KHz wide. Full details on how it works ca

1 Elecraft KX3 including KXFL3 Roofing Filter, KXAT3 Antenna Tuner, KXBC3 NiMH Battery Charger, KXPD3 Keyer, and MH3 Hand Mic Factory Box and Manual and all cables that came with unit $1350 including