I am looking for some guidance using the Elecraft K3s with P3 and Steppir SDA100. What cables needed and what settings are needed on both the K3s and SDA100 to get the Steppir BigIR to automatically s

I have recently gotten back into CW and I want to get a K3 purely for CW. I have seen plenty of K3/100/AT for under $2000. My code speed is between 13-18 wpm, but I am trying to get proficient so that

I've used the K3/0-mini and RRC boxes quite a bit in a mobile setup. Since 99.999% of my operation was CW I didn't have to deal with many of the idiosyncrasies of the K3/RRC combo. Now the plan is to

Just recently was unable to find any Ports listen in the K3 Utility for my K3S I checked to make sure it was set to Configure-RS232-USB. I also tried another USB cable to the computer and also switche

Looking to buy a K3 in the U.K. if anyone is selling, must have the IO board and low level outputs, prefer USB but the RS232 will be fine. 73 Tim M0AFJ

The Bees have swarmed and the Skeeters are frozen. Now it's - The Peanut Power Sprint! Everyone plays... Outdoors, Indoors, lo/hi power... There is even a QRO category. https://www.contestcalendar.com

Cannot find Menu item that changes Hi tone to Low tone. 73, Jim K7EG

Can the K3 Alarm On setting be saved? I can set the radio to turn on at a given time, but must reset it daily. Can the Alarm On setting be saved so that the radio automatically turns on every day? Tha

I use MMTTY for RTTY decode. Is it true that K3s built-in 2Tone decoder is superior? Jim K7EG

Digital Display Unit for Elecraft's W2 Watt Meter: With digital read out the DDU takes the guess work out of the LED light bar. Digital Display Unit for Elecraft's KXPA100 amplifier: Don't wait for a

When you bring up the KPA 1500 Remote program developed by Electraft, you have manually connect to the amp via USB or ethernet. I am using ethernet. Is there a way to auto connect. When the program st

My K3 will not Transmit SSB on any frequency. However it will transmit CW and LSB on all frequencies. All the menu and config settings are fine. Ant swr 1.2. Tried 2 different mic’s with no improvemen

I have for sale an Elecraft P3 Panadapter, serial #3790, complete with P3SVGA Video Adapter and P3TXMON Transmit Adapter, 1.8-54 MHz 2KW Directional Coupler and all cables/manual. Excellent condition

Just throwing this out there. I'm not a data texting on the radio guy but some data modes used USB I seem to recall. Wonder if anything to do with that, anybody? 7! Absolutely Awesome

My forecast is menu and config are not fine. Best of luck. Did it work previously? Type of mic element? Bias on or off? Front or rear ? Mic gain? L or Hi? 7! Absolutely Awesome

After doing the KPF3A mod on my K3, and installing the KBPF3A, I get this error on power on. I can find no procedure for correction or troubleshooting the error. If you wish, off list reply: bobdehane

For a friend I try to help with his setup. PC is Windows 10, 64-bit and the Station is a Elecraft K3. The connection between PC and K3 is an USB cable in both ends. We guess that a Windows update lost

The letter E appears briefly under the frequency display when the radio is turned on and when you change bands. Asked several K3 owners and looked through the manual and can’t find any information abo

I'm having a problem with signals being mirrored around multiples of 1000Hz. The last time it happened, it was every 500Hz. The issue is intermittent and behavior goes back to normal after unplugging

Hi, Received this yesterday. Just FYI. 73, Christian F1GWR K3_K3S Options Pre-Order FormView this email in your browserK3/K3S Options Pre-Order Interest Form We've heard from many of you that there is