OK, my KAT500 frequency training and configuration tweaking efforts have worked well. In Manual mode now, I am hearing very little – if any – relay chatter when changing bands, even when being driven

Has anyone used the Tunematic screwdriver antenna controller with a icom 7610 and KPA-1500 amplifier? I currently use the Tunematic to set the lowest SWR on my Tarheel antenna. Wonder if there are any

John's original email stated: " neither receiving nor transmitting" on 10M. Nothing to do with propagation, I think. I suggested to John to check which ANT was selected for 10M, and to check CONFIG: B

Government !

Folks, realizing that for whatever reason it is streng verboten to ask about the K4, I would really like to know if any actual production K4's have shipped to customers, whether pre-Linux update or po

To all, This list is for the Elecraft K3. Although K4 comments are welcome here, political commentary is not. In terms of the frustration in waiting for the K4, and any frustration with Elecraft in ge

I've filled out the forms on the Elecraft site several times asking about cost (with shipping) and availability for a KPA500 fan with no response. Anybody know a cost or if the company has the lights

Hi guys, can anybody tell me what type Q4 and Q5 in the T/R switching circuit of KPA500 is? Thanks a lot 73, Andy

I have recently purchased an ALS-1306, and also the Ameritron K3 band data cable...and just came across the Jan. 2016 ARRL article that recommends to not use this, as the direct keying from the Acc ja

Hi, I recently started using the K3. When I change the band, VFO B changes to the same band. Is it possible that I switch the band of VFO A but VFO B stays on another band? 73 Alex UX7CQ Отправлено из

Special thanks to Dick Dievendorff for his patient assistance in guiding me through a step-by-step troubleshooting process on my KAT500. Ultimately the problem was found to be external to the KAT, whi

When I first use 10M after the rig has been off, it takes about 5 seconds for keydown full power to be achieved. After that, full power seems to be there immediately. Ant tuner is off, SWR is 1.2. I d

Is there an easy shortcut i can use to switch between SSB and Data ? i have a K3s with the MH2 microphone.. Does the Frequency Memory Editor have the capability to make those changes? Maybe the rear p

Anyone getting a K4 and looking to sell their K3S, I am looking for one. At the minimum I am looking for one with the 100Watt amp, and the Tuner. A second receiver, general coverage receiver, addition

I have a K3 (not S) for which I'd like to get a sub receiver for. My rig does NOT have the upgraded synthesizer. I'm flexible on filters. -de John NI0K

Hi, I’m looking to buy a working Elecraft XG2 Signal Generator. Assembled or not is fine. Please let me know if you have one. Thanks, Fred - KD8ZYD

I have an Elecraft XG2 Signal Generator for Sale . This is a used Elecraft's XG2 3-Band Test Oscillator Signal Generator. The XG2 uses a crystal oscillator and is ideal for receiver testing, alignment

Does anyone know how to get the KAT500 to automatically put the K3 in the "Tune" mode (RF out) when the button on the KAT500 is pressed? I remember having this problem with the KPA1500, but fixed it s

I can type into the P3 transmit window from the keyboard, do ctrl T and transmit what I have typed. But, with VOX turned on, I type and it still fills the transmit window and won't transmit until I hi

-- Hello, I’m looking for a K3S module for K-3. must be in great shape and working. please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@.