|
Setting P3 Macro string into a P3 FN1 front panel Function Button. For WSJT-x FT8 and data modes. Help please. 2 messages
After spending more than three hours of reading manuals and programmers reference material and research and phone calls, I give up, and have to ask our illustrious group : Where on the web, or where i
After spending more than three hours of reading manuals and programmers reference material and research and phone calls, I give up, and have to ask our illustrious group : Where on the web, or where i
|
By Mark W2OR
·
|
|
FS: K3/100, P3 -- Reduced Price
This is a price reduction on the fully featured and updated K3/100 and P3 I posted for sale a few days ago. Both are in exceptional physical condition. This K3 has the sub receiver, 2M, VLF on Main re
This is a price reduction on the fully featured and updated K3/100 and P3 I posted for sale a few days ago. Both are in exceptional physical condition. This K3 has the sub receiver, 2M, VLF on Main re
|
By
GRANT YOUNGMAN
·
|
|
Re-listing K3S For sale 16 messages
I just received a check for the K3S, however, the original buyer decided to go another direction so I am re-listing the below K3S and his check is now in the shredder. For Sale is an Elecraft K3S/100-
I just received a check for the K3S, however, the original buyer decided to go another direction so I am re-listing the below K3S and his check is now in the shredder. For Sale is an Elecraft K3S/100-
|
By Everett N4CY
·
|
|
FS: K3/P3
Since I currently have no reasonable solutions for fixed station operation and am primarily KX3-portable, I have reluctantly decided to part with my K3 and P3 The K3 is fully featured and updated. The
Since I currently have no reasonable solutions for fixed station operation and am primarily KX3-portable, I have reluctantly decided to part with my K3 and P3 The K3 is fully featured and updated. The
|
By
GRANT YOUNGMAN
·
|
|
For Sale are 73CNC weighted tuning knobs for K3, or K3S. SOLD
Knobs have been SOLD Everett N4CY For Sale are a set of two weighted tuning knobs for K3, or K3S. One is for the main VFO and the other smaller one is for VFO B. This upgrade will allow for smother tu
Knobs have been SOLD Everett N4CY For Sale are a set of two weighted tuning knobs for K3, or K3S. One is for the main VFO and the other smaller one is for VFO B. This upgrade will allow for smother tu
|
By Everett N4CY
·
|
|
For Sale are 73CNC weighted tuning knobs for K3, or K3S.
For Sale are a set of two weighted tuning knobs for K3, or K3S. One is for the main VFO and the other smaller one is for VFO B. This upgrade will allow for smother tuning on your K3, or K3S. These are
For Sale are a set of two weighted tuning knobs for K3, or K3S. One is for the main VFO and the other smaller one is for VFO B. This upgrade will allow for smother tuning on your K3, or K3S. These are
|
By Everett N4CY
·
|
|
For Sale Elecraft K3S SOLD
The K3S is sold.... Everett N4CY For Sale is an Elecraft K3S/100-F Factory Built SN-10484. It comes with the standard 2.7kHz Filter, original instruction manual, USB, RJ-45 to RS232 and power cables.
The K3S is sold.... Everett N4CY For Sale is an Elecraft K3S/100-F Factory Built SN-10484. It comes with the standard 2.7kHz Filter, original instruction manual, USB, RJ-45 to RS232 and power cables.
|
By Everett N4CY
·
|
|
KX3 FS
I bought a brand new KX3 while at the Visalia DX Convention back in April. The box it came is is still sitting here. It is a factory built unit unit and is configured as follows: KX3-F 160-6M Transcei
I bought a brand new KX3 while at the Visalia DX Convention back in April. The box it came is is still sitting here. It is a factory built unit unit and is configured as follows: KX3-F 160-6M Transcei
|
By Larry
·
|
|
ERR PLL2 message
Hi all. Hopefully someone can point me in the direction of where to look on my K3 with sub receiver. 1. On power up I get ERR PLL2 message. 2. Followed the troubleshooting guide and in CONFIG:VCO MD I
Hi all. Hopefully someone can point me in the direction of where to look on my K3 with sub receiver. 1. On power up I get ERR PLL2 message. 2. Followed the troubleshooting guide and in CONFIG:VCO MD I
|
By Paul Booth
·
|
|
VGA Capture Card with a P3 4 messages
Hi Gang, Is anyone out there using a SVGA capture card/device to capture the SVGA from the P3 and present the display in a Windows 10 window? I’ve got two large monitors with loads of screen real esta
Hi Gang, Is anyone out there using a SVGA capture card/device to capture the SVGA from the P3 and present the display in a Windows 10 window? I’ve got two large monitors with loads of screen real esta
|
By Mike Flowers
·
|
|
Looking for a few options for my K3
Hi and good day all, hope I can post this here, de Frank KG9H I am looking for the following for my K3 KBPF3 general coverage receiver bandpass module KFL3B-FM-IR_13 kHz KFL3A-1.0K-IR_1kHZ Filter for
Hi and good day all, hope I can post this here, de Frank KG9H I am looking for the following for my K3 KBPF3 general coverage receiver bandpass module KFL3B-FM-IR_13 kHz KFL3A-1.0K-IR_1kHZ Filter for
|
By kg9hfrank@gmail.com
·
|
|
KAT500 AMP Key Interrupt Setting 12 messages
When reviewing my settings in the KAT500 Utility, I came across an Amp Key Interrupt setting - Not sure if I should check this setting in the KAT500 menu? My configuration is a Icom 7300 connected to
When reviewing my settings in the KAT500 Utility, I came across an Amp Key Interrupt setting - Not sure if I should check this setting in the KAT500 menu? My configuration is a Icom 7300 connected to
|
By Irwin Darack
·
|
|
P3TXMON Switch
I have a 200 W and a 2 KW sensor for my P3TXMON. I understand that I can use a manual RJ45 switch to switch between them. I contacted Elecraft support and they thought that it would work, but the one
I have a 200 W and a 2 KW sensor for my P3TXMON. I understand that I can use a manual RJ45 switch to switch between them. I contacted Elecraft support and they thought that it would work, but the one
|
By Mark Erbaugh
·
|
|
Noise at beginning of transmission with KX3 4 messages
I am setting up an Elecraft KX3 to use for FD with FT8. A beginning of each my transmissions I am hearing a 0.5 to 1 second noise followed by normal sounding transmission. Noise is a "vibrating braaap
I am setting up an Elecraft KX3 to use for FD with FT8. A beginning of each my transmissions I am hearing a 0.5 to 1 second noise followed by normal sounding transmission. Noise is a "vibrating braaap
|
By Anthony Luscre
·
|
|
LF P3
Hi. I too am looking to add a P3 to my small shack. You may contact me via email or via the contact info on my website. TNX, Fred.
Hi. I too am looking to add a P3 to my small shack. You may contact me via email or via the contact info on my website. TNX, Fred.
|
By ve7fmn
·
|
|
KIO3 Audio Board 5 messages
I have had issues with my K3 Audio Line in since I got it but it failed today. The Line In Jack front tab broke loose. I suspect it has been failing as I have always had to jiggle it a bit when I want
I have had issues with my K3 Audio Line in since I got it but it failed today. The Line In Jack front tab broke loose. I suspect it has been failing as I have always had to jiggle it a bit when I want
|
By n3bud
·
|
|
KIO3 Board
I have been having troubles getting my K3 to send digital stuff since new. Today I noticed the Line is loose on the board and the outer ring tab is no longer making connection. Wondering if anyone in
I have been having troubles getting my K3 to send digital stuff since new. Today I noticed the Line is loose on the board and the outer ring tab is no longer making connection. Wondering if anyone in
|
By n3bud
·
|
|
For Sale - K3s 100 w Transceiver
I am selling my one of the two K3s 100 W Transceivers that I own. I no longer require two K3s radios. Elecraft High Performance K3s 100 W Transceiver - $3,300.00 Serial Number 10625 KPA3- 100 PA (100
I am selling my one of the two K3s 100 W Transceivers that I own. I no longer require two K3s radios. Elecraft High Performance K3s 100 W Transceiver - $3,300.00 Serial Number 10625 KPA3- 100 PA (100
|
By Irwin Darack
·
|
|
Help with WJST-X, MicroKeyerII and K3 5 messages
I'm able to decode FT8 without any issues, but am having no luck transmitting. I can key the rig, but no tones are sent. I know tones are being generated, as when I set the output to the radio to SPEA
I'm able to decode FT8 without any issues, but am having no luck transmitting. I can key the rig, but no tones are sent. I know tones are being generated, as when I set the output to the radio to SPEA
|
By Eric Rosenberg W3DQ
·
|
|
Problem - Solved 12 messages
Thanks to Alan G4GNX (who lives 5miles away) he went through all the settings and it resolved all the issues that existed. Later I did however find the cause of the problem when Anderson Power Pole co
Thanks to Alan G4GNX (who lives 5miles away) he went through all the settings and it resolved all the issues that existed. Later I did however find the cause of the problem when Anderson Power Pole co
|
By Bob G3REP
·
|