I have an Elecraft XG2 Signal Generator for Sale . This is a used Elecraft's XG2 3-Band Test Oscillator Signal Generator. The XG2 uses a crystal oscillator and is ideal for receiver testing, alignment

Does anyone know how to get the KAT500 to automatically put the K3 in the "Tune" mode (RF out) when the button on the KAT500 is pressed? I remember having this problem with the KPA1500, but fixed it s

I can type into the P3 transmit window from the keyboard, do ctrl T and transmit what I have typed. But, with VOX turned on, I type and it still fills the transmit window and won't transmit until I hi

-- Hello, I’m looking for a K3S module for K-3. must be in great shape and working. please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@.

Sorry for the re-post but I want to to be specific here I’m looking for a pair of KSYN3A boards for a K-3. must be in great shape and working. Please let me know what you have and the price you’d like

Having spent some time chasing groups of S6/7 carriers spaced at ~2.5kHz on 160M. I have traced them to data signals from the P3 being injected into the DCHF-2000 coupler. To check that this was the c

-- Hello, I’m looking for a couple of working “synthesizer modules” for a K3. Please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@... Tha

Looking for a K3/0 or K3/0-Mini in good condition. Feel free to send an email and tell me what you have and what you would like for it. 73 SA2RJO

I am selling my Elecraft K3s and will post here before placing on Ebay. Elecraft K3s - this radio was built by kit and is in excellent condition. Serial # 10354 100W Upgrade Filters are: 2.7kHz, 2.1 k

I have a beautiful Elecraft K3/0 remote unit and Remote Rig units for sale. These were purchased several years ago, put in a box, and never used. They are in pretty much new condition. I have no need

First, I’d like to thank everyone who offered suggestions to help me get my K3 working with WSJTX without using CAT control. Your input and encouragement were much appreciated. The problem has been so

when this happens audio goes away and only one speaker works after turning up audio,ten hicur and audio goes away again, config drops to one speaker, disconnect all audio still the same. Config drops

I’m trying to get my K3 to work on WSJTX. After literally hours the RX finally works. No amount of fiddling has helped with TX. How do I get the K3 to TX? I can’t use CAT until I get the USB/RS232 cab

Thanks everyone for the helpful suggestions. I think we have done it! Here was the secret to success: 1. Setting the Rig to “None” under the Radio tab in WSJTX was a HUGE step forward. The article I r

I am interested in buying an excellent condition K-Pod with cables. Please include shipping cost to zip 33810. Reply directly to my QRZ address which is: k2mk dot mike at gmail dot com 73, Mike K2MK

i think he wants to run two apps *( wsjt & CAT) on one rs232 line -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

I have a question for users of the MFJ-148RC clock. Please respond, thank you. 73, Robert (KO4JHZ)

I just received my repaired KIO3B back from Elecraft and I will be installing it this morning. So my question is would it be a good idea to install a USB isolator between my K3S and my computer to off

Dear Joe, This sounds like the classic symptom of a T/R relay sticking, which can be caused by dirty relay contacts(slide a new $1 bill across or between contacts 5 or ten times) or the specific relay

I offer for sale my KPA1500 amplifier in excellent cosmetic and operational condition. Given the amount of nonsense I see on a lot of boards with respect to high end gear sales, I would welcome the se