I know it's in the manual somewhere, but I can't find it. I usually have my K3 setup so VFO A is on the upper portion of the band set for SSB and VFO B is on the lower portion of the band set for CW,

Hi just joined the group, a disabled friend of mine has bought what I think is a K3/100 he has only had it a few days bought used, Ive never used or had any Elecraft equipment so im trying to read up

I am trying to make connection to my working KAt500 using the Elecraft supplied cable between my computer and my KAT500. I am receiving the following error message: 10:01:41 Opening serial Port COM8 1

I pass this along as and F Y I. We "see" many signals on the bands today that are less than stellar. Even some of the newer, latest, and greatest radio have significant issues in this regard. Many rad

I've read through everything I can find and I think I've just confused myself. I recently acquired a K3S and even more recently acquired a K3/0-Mini. My plan is to use the K3/0-Mini in my house to con

Hi, My P3 appears to have failed... All seems to work on it but the display. A bit more data: 1. The (3 utility can talk to it. 2. If I try and capture an image, it goes through the motions, but no im

Strange behavior. FT8 on 80M 3547 rx and 1000hz tx. When I key radio the K3s shifts from 3547 to 3546 down 1Khz. I expected TX to remain on 3547 with tx Up 1000 Hz. First time on 80 FT8 Jim K7EG

Looking for a SP3, please email me cost, and condition. I will pay shipping and insurance to my home. -- 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Special

Thanks to those who did send me a message, but I am still looking for a 100w K3 or K3S with ATU to finalise my shack line-up. Condition is irrelevant (a few scratches are fully in order) so long as it

Need a KXV3 for K3. Good in QRZ so contact me offline. Fred, K0FG

In excellent condition - do NOT want the Remote Rig boxes - just the Mini. Please respond via direct email. Thanks -- Don N4HH at yahoo.com

I am looking for used, but working, DCHF-2000 power coupler for the W2 wattmeter, 0-2000 watts. If you have one for sale, please write me OFF LIST, with condition, and price. I will pay insured shippi

I hope the people in this group dont think i am crazy I have a K3 connect to a P3 with txmon and svga. Lately i have notices noise that seems to follow the cursor. here is a couple of examples: 80 met

I want to buy an Elecraft XG3 RF Signal Source. Please email me off list if you have one you would like to sell describing its condition and asking price including shipping to 97405 (Eugene, OR). Than

If you plan to return your K3 to the mothership, be aware their turnaround time has apparently lengthened. No surprise given what they’ve been through with COVID, supply chain challenges, etc. Elecraf

KPA 1500 is remote located. Using Elecraft remote program, I can connect with the amp via USB or Ethernet. Everything works fine. By that I mean, you can go from standby to operate, change antennas, p

I am looking to obtain an Elecraft XV432 transverter if anyone has one for disposal, preferably from Europe in view of the high shipping rates from the USA. 73 de David G4DMP -- + - - - - - - - - - -

Looking for The complete kx3 line Elecraft Macro Programming The Elecraft KXPA100, PX3 and 2M/4M Transverter Please let me know what you have Tnx-73 Dean K2WW

Having found a K3S, I am now looking for a P3. One with "no options" is preferred, but I will consider one with the VGA adapter. I'd really like to find one that has the CBLP3Y KIO3B RJ45 cable. Pleas

Hello, I am looking for a used DCHF-2000A power sensor by Elecraft. If you have one that is working, please email me with condition, and price. I will pay shipping. -- 73, and thanks, Dave (NK7Z) http