I want to connect my K3 to my Ciro Mazzoni Baby Loop ATU v2.0 via an RS232 to RS232 cable. I know that the loop controller has a setting to allow it to receive frequency change commands from Elecraft

Didn't find this exact issue with a search, so here we go... K3S #10299. I have been experiencing low output on 12 and 10 meters, so did a TX power calibration run with K3 Utility to see what I could

Hi On a brand-new PC with a brand-new Windows 11 (updated), I got the message, that some om the programs needed an APP (!!) to be installed. And no app was found in my Windows 11 to the program. I dec

Hi, after reassembling the K3 the KPA3 gives no output. The 12 Watts low power works fine and cranking up the power the relay clicks but 0 Watts output. The TUNE lets the KPA draw excessive current, a

I noticed after this weekends SS-CW that my K3s was only putting out a max of 42-45 watts even when set to 100w... with a good match... Tried running a TX calibration, and it failed immediately, sayin

Operating remote with the K3/0 I lost RX and TX on my K3. I'm 1100 miles away and no drawings. Anyone have any ideas? Looks to me like the K3 went sour. Something in the TX/RX line? 73, Wayne N2WK

Hi just joined the group, a disabled friend of mine has bought what I think is a K3/100 he has only had it a few days bought used, Ive never used or had any Elecraft equipment so im trying to read up

Today my pc no longer recognizes K3S 1.Radio RS232 port is set to usb/38400bd. Tried two different usb type b to type c cables. Tried plugging type c cable connection into both direct pc usb port and

Hi all, During the last CQ WW SSB contest my K3s DVR sometimes “lost” its message(s). I have noticed that in another contest as well. Sometimes it was difficult to load a new message. Nothing was stor

Mint condition Elecraft K3S. Serial #10366 Includes: K3S Transceiver KPA3A-F 100 watt upgrade KAT3A-F Antenna tuner KRX3A Sub Receiver KBPF3A-F General Coverage Receiver Module Filters for main receiv

When I connect the aux cable between the K3 and KPA500 get PTT ERR error on the K3. I do not have the interrupter is there a way around this? Thank you 73 Emory WM3M

I recently built a 160m hybrid design antenna by Claude Jollet, VE2DPE. When I tune this antenna using the TUNE button, it shows a power out of 100w. When I tune using the ATU TUNE button, it also sho

New to Elecraft kit here having just bought a second hand K3. I would like to use my studio mic (XLR connector) with the radio, but can find no info on how to interface it. Apologies if this has been

The past couple of days I've noticed an interesting anomaly in my K3/0-mini and K3 combo (via remoterig if it's relevant, self-contained LAN connection). I will leave the radio on to monitor a band on

I recently noticed that if I touch my key in SSB mode it goes into CW TX, I really dont want this, ive done some digging and have found its set via CW WGHT, but I cant seem to work this out, I just wa

I frequently use the M1-M4. Since setting all the 16 available macros to be used along the kpod the M1-M4 Auto-Repeat is not working anymore. what I have done: I cleared M1-M4. I cleared bank1 and ban

Beginner's Guide to HF Operation- Week 3. Join us live Wed Oct 26 at 9 PM Eastern / 6 PM Pacific / 01:00 UTC (Thurs.) via Zoom Link- http://www.ratpac.us/zoom Watch previous... Week 1 - https://youtu.

Remote Rig 1258 MK II K3 pair with Wifi modules and K3 connecting cables for sale - $550 plus shipping Contact me at this email address. Edd - KD5M

I have two SP3 speakers together with cables and manual for sale for $290 shipped conus in original Elecraft packaging. I’m the original owner and the speakers are in excellent condition.with very lit

Beginner's Guide to HF Amateur Radio- Week 2- HF Radios & Antennas watch the recording now- https://youtu.be/dH5gsA1CZSc Join us live for week 3 Oct 26- http://www.ratpac.us/zoom View Week 1 Recording