|
P3 issue
It's an issue with the signal between the transceiver and the P3... Check the cable connections at the radio and the P3. Verify the cable is good.... continuity on center, continuity on shield, no con
It's an issue with the signal between the transceiver and the P3... Check the cable connections at the radio and the P3. Verify the cable is good.... continuity on center, continuity on shield, no con
|
By
Clay Autery
· #34718
·
|
|
Maximum Aux Cable Length?
Correct Answer: It depends. Depends on the hardware used in the communication. Depends on the communication protocol. Depends A LOT on the quality and construction of the cable. FYI, back in the days
Correct Answer: It depends. Depends on the hardware used in the communication. Depends on the communication protocol. Depends A LOT on the quality and construction of the cable. FYI, back in the days
|
By
Clay Autery
· #34466
·
|
|
K3 shutting off SN 2963
Low number K3.... Should be checked for the NON-gold pins issue. 73, ______________________ Clay Autery, KY5G (318) 518-1389 On 01/11/21 17:30, Bill Maddock via groups.io wrote:
Low number K3.... Should be checked for the NON-gold pins issue. 73, ______________________ Clay Autery, KY5G (318) 518-1389 On 01/11/21 17:30, Bill Maddock via groups.io wrote:
|
By
Clay Autery
· #34174
·
|
|
K3S parts availability???
Thank you. ______________________ Clay Autery, KY5G (318) 518-1389
Thank you. ______________________ Clay Autery, KY5G (318) 518-1389
|
By
Clay Autery
· #33715
·
|
|
USB Issue K3S
Yep.... even a shielded USB cable will act up.... Often because the shield is not continuous or not terminated properly (or at all). Thus, you need suppression from the ferrites molded on the cable OR
Yep.... even a shielded USB cable will act up.... Often because the shield is not continuous or not terminated properly (or at all). Thus, you need suppression from the ferrites molded on the cable OR
|
By
Clay Autery
· #33357
·
|
|
USB Issue K3S
Sounds like its a USB port getting close to wearing out... USB A-B is a lot less robust than USB C ports... IMHO ______________________ Clay Autery, KY5G (318) 518-1389 On 09/21/20 07:23, Alan Baker w
Sounds like its a USB port getting close to wearing out... USB A-B is a lot less robust than USB C ports... IMHO ______________________ Clay Autery, KY5G (318) 518-1389 On 09/21/20 07:23, Alan Baker w
|
By
Clay Autery
· #33354
·
|
|
Cady K3s/P3 hard copy book
I printed mine on better than printed book paper stock on the printer in the other room, front and back, added my own front/back cover designs, et al. Less than $10 in paper AND ink costs.... For abou
I printed mine on better than printed book paper stock on the printer in the other room, front and back, added my own front/back cover designs, et al. Less than $10 in paper AND ink costs.... For abou
|
By
Clay Autery
· #32842
·
|
|
Cady K3s/P3 hard copy book
https://www.lulu.com/shop/fred-cady-ke7x/the-elecraft-k3s-and-p3-pdf-version-16/ebook/product-23929395.html ^^^^^^^ Latest version 1.6 of the K3s/P3 book (2018 update) available above for $25.00 Later
https://www.lulu.com/shop/fred-cady-ke7x/the-elecraft-k3s-and-p3-pdf-version-16/ebook/product-23929395.html ^^^^^^^ Latest version 1.6 of the K3s/P3 book (2018 update) available above for $25.00 Later
|
By
Clay Autery
· #32840
·
|
|
Cady K3s/P3 hard copy book
The man bought the printed book. The man bought the printed book from a seller who had purchased the book from the publisher or other upline distribution network. The seller understandably marked the
The man bought the printed book. The man bought the printed book from a seller who had purchased the book from the publisher or other upline distribution network. The seller understandably marked the
|
By
Clay Autery
· #32833
·
|
|
Cady K3s/P3 hard copy book
I wasn't dinging you specifically, Chris. My apologies if you took it that way. I simply saw your post/response and decided to step in and correct that bit of disinformation being passed around. Have
I wasn't dinging you specifically, Chris. My apologies if you took it that way. I simply saw your post/response and decided to step in and correct that bit of disinformation being passed around. Have
|
By
Clay Autery
· #32831
·
|
|
Cady K3s/P3 hard copy book
I don't know where y'all are getting this $60.00 figure from. I have never paid that much for ANY Cady publication. I have purchased multiple versions of the K3s/P3 publication, et al. After he passed
I don't know where y'all are getting this $60.00 figure from. I have never paid that much for ANY Cady publication. I have purchased multiple versions of the K3s/P3 publication, et al. After he passed
|
By
Clay Autery
· #32824
·
|
|
Grounding/Bonding: Was Re: [Elecraft-K3] Factory service still available?
Typo... (aka: brain gears slipped a tooth while typing) <smile> ______________________ Clay Autery, KY5G (318) 518-1389 On 05/11/20 07:44, John Canfield wrote:
Typo... (aka: brain gears slipped a tooth while typing) <smile> ______________________ Clay Autery, KY5G (318) 518-1389 On 05/11/20 07:44, John Canfield wrote:
|
By
Clay Autery
· #32667
·
|
|
Grounding/Bonding: Was Re: [Elecraft-K3] Factory service still available?
I did not answer the original questions: How would you measure that impedance? Between which two points? Lou KE1F 2nd question first.... between ALL of them, from end to end... Wherever the lightning
I did not answer the original questions: How would you measure that impedance? Between which two points? Lou KE1F 2nd question first.... between ALL of them, from end to end... Wherever the lightning
|
By
Clay Autery
· #32650
·
|
|
Factory service still available?
Lightning events happen in a VERY short time period... As I understand it, the conductors that you are using in your lightning protection system to BOND all the chassis together and thence to your ent
Lightning events happen in a VERY short time period... As I understand it, the conductors that you are using in your lightning protection system to BOND all the chassis together and thence to your ent
|
By
Clay Autery
· #32649
·
|
|
Elecraft K3 for sale ...
They are just communicating the general disdain for folks trying to run an auction on and Elecraft group. Set an asking price, and be done with it. This ain't e-Bay! ______________________ Clay Autery
They are just communicating the general disdain for folks trying to run an auction on and Elecraft group. Set an asking price, and be done with it. This ain't e-Bay! ______________________ Clay Autery
|
By
Clay Autery
· #32581
·
|
|
EARLY ANDERSON POWER POLES & added USB
Not often that unintended consequences fall in our favor... BONUS!!! <big smile> ______________________ Clay Autery, KY5G (318) 518-1389 On 04/30/20 19:41, Dave Cole wrote:
Not often that unintended consequences fall in our favor... BONUS!!! <big smile> ______________________ Clay Autery, KY5G (318) 518-1389 On 04/30/20 19:41, Dave Cole wrote:
|
By
Clay Autery
· #32538
·
|
|
EARLY ANDERSON POWER POLES & added USB
You STILL cannot misrepresent your knock-off as a true Anderson product.... ______________________ Clay Autery, KY5G (318) 518-1389 On 04/30/20 07:27, Richard Smith wrote:
You STILL cannot misrepresent your knock-off as a true Anderson product.... ______________________ Clay Autery, KY5G (318) 518-1389 On 04/30/20 07:27, Richard Smith wrote:
|
By
Clay Autery
· #32536
·
|
|
EARLY ANDERSON POWER POLES & added USB
If we sunk a Chinese container vessel EVERY time we caught counterfeit Chinese crap coming into this county, the problem would be largely self-solving. Either they would stop the practice, or the cont
If we sunk a Chinese container vessel EVERY time we caught counterfeit Chinese crap coming into this county, the problem would be largely self-solving. Either they would stop the practice, or the cont
|
By
Clay Autery
· #32535
·
|
|
EARLY ANDERSON POWER POLES
I LUCKED into some true silver plated PP 30 amp pins once. I still have a few, and prefer them. Trust me... if you've ever seen a true silver one, there is no mistaking them. They are much shinier/bri
I LUCKED into some true silver plated PP 30 amp pins once. I still have a few, and prefer them. Trust me... if you've ever seen a true silver one, there is no mistaking them. They are much shinier/bri
|
By
Clay Autery
· #32511
·
|
|
EARLY ANDERSON POWER POLES
If you have spare factory capacity and a slave labor force.... like the Chinese, then yeah... pretty much. I ONLY buy PP products from KNOWN authorized sources. And I REPORT anyone selling counterfeit
If you have spare factory capacity and a slave labor force.... like the Chinese, then yeah... pretty much. I ONLY buy PP products from KNOWN authorized sources. And I REPORT anyone selling counterfeit
|
By
Clay Autery
· #32509
·
|