I am considering the purchase of a K3. I am a DX chaser and casual contester mostly on CW and some RTTY. I'm probably going to add the second receiver for DX chasing. From what I read filter installat

I have just built a K3 and have not been able to get PSK31 or RTTY to work on my system. Here is what I am using: Mac running Mavericks, Cocoa Modem program for digital modes, and a Signalink USB inte

Problem solved. After conversations with Elecraft support, I pulled the front panel from the radio and checked the connector pins. All looked OK and none was bent. I removed the DSP board and reseated

I am new to the K3 having just completed the build last weekend. I am trying to add a CW memory to the K3 using the K3 Utility/Configuration/Edit CW Memories. The K3 Utility connects to the K3 and I c

I currently have PF1 set to turn on Split mode and PF2 to turn off Split mode. Both work fine. I am curious if a PF key can be set to toggle between the two, thus freeing PF2, for example, to do somet

Problem solved with the help of Dick, K6KR and John, KU4AF. I would like to share the macros in case others would like to do the same. Set it up like this in the K3 Utility: Macro1 SPLIT+2 - SWT13;SWT

Has anyone figured out how to play K3 DVR voice files, normally activated by pushing M1-M4, via the F keys in N1MM+? I never have used .wav files with N1MM+. I would like to assign M1 to F4, M3 to F2

I purchased a USB keyboard and plugged it into my P3. Hoping to use this setup for RTTY I set up some text files in several memories. They work fine. However, the Help menu indicates Ctrl-T will begin

I recently received my K Pod and set it up. However the tuning rate using the K Pod knob is half the rate of the K3 knob. The K3 tunes 1 KC per revolution but the K Pod only tunes .5 KC per revolution

I recently purchased a keyboard to plug into my P3 and used it for RTTY, displaying text on the second monitor. When the station I was copying went to split operation, I wonder if it is possible to di

Greetings all, I would like to program PF1 to toggle the output power between say 30 and 100 watts. Cranking the power down for digital modes would be so much more convenient. Is there someone who has