I have made decision to buy a K3, but would be interested in some recommendations on initial options. I have decided to start with the 100w Kit, but then with price in mind, would like to proceed in s

Bill - you say you got the PA and ATU first. PA meaning ?????? could you spell out abbreviation. 73 Paul

Steve- KE7X's book arrived in the mail today, about to get into it. Tnx for response. Paul

Hi- I am sure that this has come up before but I am a relative newcomer having just built K3 #6663 and trying to get all apps in the shack up and running. I want to continue to use my Signalink USB wi

Hi- thanks to Dave k3dcw for the quick answer on my Signalink USB question earlier. As I said earlier I am a relative newcomer having just built K3 #6663 and trying to get various accessories hooked u

This might be a really dumb question but...Have a buddy who is about to send his K3 in to Elecraft for several mods, one of which is the DVR, but it will not be back in time for next weekends 10M cont

I am trying a CW program called MRP40 and so far it decodes just fine using it with my K3 and with a Signalink USB interface, win 7 pc with 2.4 ghz processor and 4gb of ram. (btw: I am able to send an

Matt- when sending cw normally with paddles, I in cw mode with vox on. So I tried same setup with this MRP40 program. Thought sound card would do keying of K3. With DM780 program , it seems to work. 7

Emory- understand what you are saying, but the HRD DM780 program keys the K3 and is not hooked up to the key input- it seems to use PTT input fm DM780. --- the MRP40 program causes Signalink usb sound

Rick - DM780 does use the CW (key) mode (not really sure what CW key mode means). However my real question is why is the SignalinkUSB Tx light and the K3 Tx light coming on in sync with the MRP40 keyi

Yes in CW Mode and Vox Paul

Rich - understand- thanks for your help 73 Paul

the WSPR Program seems to work fine for me except when I try to change the Band/freq on the K3 from the wspr program, I get the following error string: ************************************************

Mike - I have the serial rate in the WSPR Program set to 38400 because that is what I have set on the K3 RS 232 port. The K3 talks to the PC fine and all other programs(like HRD) at this speed. In WSP

Mike- changed WSPR setup to 1 stop bit and still got this error: ****************************************************************** WSPR Version 2.11_r2263, by K1JT Run date: Sun Jan 13 16:34:15 2013

I am having a problem getting the WSPR Program to talk with my K3. Looking for anyone having success getting the program to control their K3. I use a Signalink USB sound card interface. More specifica

Thanks to the help of Cliff, VK2CC, I got the problem corrected. In the WSPR setup, under handshake I had "Hardware" selected, by changing to "None", the WSPR program now changes freqs on my K3, Thank

For some reason, I cannot get the scanning function to workon my K3. I am following theinstructions in the K3 manual pg 40 as well as the Fred Cady book pg. 46. I amusing the Elecraft K3 Memory Editor

Bob- thanks for the quick reply. What you describe, sounds like a mostly manual operation.. When I do M>V and recall the stored freqs, should that populate both VFO A & B and then be able to proceed t

I believe the problem I am having is when I press M>V, the freqs stored in memory are only being recalled to VFO A but not to VFO B. - For example, in memory #13 I have stored 14.000 for VFO A, ( star