Dick, if it work like You mentioned why the keyer does not interpreting exactly what I stored please? The spacing is always shortened to fix length instead of my own stored using the paddle. Simply tr

Rich, thank You for this post. You expressed exactly the behavior of the keyer in the K3. That is the merit of the problem. In fact I found the similar problem on the other el.keyers even with autospa

Joe, thank You for pointing that. It sounds like main reason of the problems which I mentioned. What I would like to know is if only I have the problem with the auto spacing or what... as I did not fo

David, in K3 keyer the problem is not in the sending the code or timing problem. The problem with replying the stored messages where the spacing is different from the stored one. regards, 73 - Petr, O

Dave, I am really sorry but I have to say > You did not understood the main problem. Maybe it is because of my bad English. Sorry for that. 1. There is no problem with number "7" or so. 2. I never had

Dick, I am able to put correct spacing when recording the messages into the keyer from the paddle. The pb is that keyer do not follow MY spacing ! I do not understand why I should use some editor or u

Hi, I would like to gently ask if anybody tried to more deeply check the behavior of the mem keyer in K3... When I am trying to record the message and manually inserting longer spaces between the fast

Jim, please be note that NR is N/A when AGC is off (on MCU/dsp:3.25/2.21). 73 - Petr, OK1RP

Jim, Steve and others, maybe I am doing something wrong, but I have to disagree with Steve. Unfortunately although the AGC THR is set to 005 it increase the noise so dramaticaly that AGC is almost unu

Mike, it's wrong way...You need to ask for issues, troubles and unexpected problems of K3. Also the same for TT. After that You should put all together then make a coffee and long time thinking about

Bill, the KFL3A-500 500 Hz filter You are talking about is 5-pole filter INRAD The set of CW filters as follows for K3: KFL3A-200 200 Hz, narrow 5-pole filter KFL3A-250 250 Hz, narrow 8-pole filter KF

Hello friends, I'm sorry to attach long text over here but our friends on Fiji have serious problems with K3. In order to help them I would like to ask all Elecrafters to help if it's possible. Below

Hi Wayne, ok. Thank You very much for Your time. So I am going to take an advice and I will move to 3.14 to check which issues will disappear. After that we will see what can be done with the rest of

Wayne, thank You for Your reply. I am using mcu 2.38 / dsp 1.9 official production release. Should I leave to newer ver. to solve it? I am not using any beta untill the new official production version

Hi, unfortunatelly it does not matter if the NB SAVE is ON or OFF. All the time I am turning OFF then ON the K3 i have to put NB ON... Dissapointed. 73 - Petr, OK1RP

Bruce, I decided to have both 8-poles (400/250) with better skirt in the main and 5-poles (500/200) in sub and it seems works well for me on Topband. 73 - Petr, OK1RP

Guys, this question or comment should be addressed to Elecraft directly maybe but I never had pb like this with line-in hum with other radios like Orion I, K2 or rise boxes in combination with several

Michael, which f/w and dsp release You are using in Your K3 please? 73 - Petr, OK1RP

Hi all, exactly agree with Bill and it's in line with thing I meant. 73 - Petr, OK1RP

Hi, regarding Your requirement think about the K2/10 also because of price vs. performance ratio. Depending to Your needs and situation of pocket it can be more valuable K2/10. I tested both (K2 and K