Date   

Thanks, Now

Richard Smith
 

I can delete my Yahoo email account I was forced to create to join group.   :)  KU4NZ  RAS


Re: Mic equalisation

Keith_WE6R
 

I highly recommend the KPOD! You can program a bunch of EQ schemes. Plus TX ESSB toggle, wide/normalize filter, home freq etc etc.
Keith WE6R


Re: KPA1500 2 antenna ports

Rick NK7I
 

You're welcome.  Just add the actual antenna relay(s) and you're good.  I'd wager that Elecraft techs can advise you there too, a phone call will answer your other questions as you place your order.

I lucked out on the KPA1500 (still waiting).  This summer I'm adding the SteppIR DB42 to the farm which is 80-6M (has the extra parts), then the inverted L will cover 160/80M so two antenna ports is perfect, although more would be welcome too.  The SteppIR will replace two existing antennas and later I'll add either a Beverage or K9AY array for listening (low noise here already).

I love simple, though it often takes a fair effort to get there ;-)  Simple just ROCKS!

73
Rick nhc


On 3/15/2018 10:05 AM, Dan Littel wrote:
Wonderful!  Thank you, Rick.
Dan
AJ9K



From: "Rick WA6NHC" <wa6nhc@...>
To: Elecraft-K3@groups.io
Sent: Thursday, March 15, 2018 11:35:06 AM
Subject: Re: [Elecraft-K3] KPA1500 2 antenna ports

Already done for you.


http://www.elecraft.com/KRC2/krc2.htm


Rick


On 3/15/2018 9:29 AM, Dan Littel wrote:
I am looking forward to the arrival of my KPA1500, an upgrade to my KPA500.  As I wait, I'm looking at ways to attach my 3 antennas to my 2 antenna port KPA1500.  Of course, I can place a manual antenna switch between the amp and one of my existing antennas.  Is there a more elegant way to create a 3rd antenna port that band switches with my K3S?
Dan
AJ9K

_


Re: KPA1500 2 antenna ports

Dan Littel
 

Wonderful!  Thank you, Rick.
Dan
AJ9K



From: "Rick WA6NHC" <wa6nhc@...>
To: Elecraft-K3@groups.io
Sent: Thursday, March 15, 2018 11:35:06 AM
Subject: Re: [Elecraft-K3] KPA1500 2 antenna ports

Already done for you.


http://www.elecraft.com/KRC2/krc2.htm


Rick


On 3/15/2018 9:29 AM, Dan Littel wrote:
I am looking forward to the arrival of my KPA1500, an upgrade to my KPA500.  As I wait, I'm looking at ways to attach my 3 antennas to my 2 antenna port KPA1500.  Of course, I can place a manual antenna switch between the amp and one of my existing antennas.  Is there a more elegant way to create a 3rd antenna port that band switches with my K3S?
Dan
AJ9K

_


Re: P3 frequency display

MichaelWilliams
 

Hi Ken

I have that also but only in the cold weather. After a few minutes (I generally leave it switched off) the display will go back to normal. Tried new cables to no avail. Just put up with it now and wait for summer.

Mike M0MRW


Re: KPA1500 2 antenna ports

Rick NK7I
 

Already done for you.


http://www.elecraft.com/KRC2/krc2.htm


Rick


On 3/15/2018 9:29 AM, Dan Littel wrote:
I am looking forward to the arrival of my KPA1500, an upgrade to my KPA500.  As I wait, I'm looking at ways to attach my 3 antennas to my 2 antenna port KPA1500.  Of course, I can place a manual antenna switch between the amp and one of my existing antennas.  Is there a more elegant way to create a 3rd antenna port that band switches with my K3S?
Dan
AJ9K


KPA1500 2 antenna ports

Dan Littel
 

I am looking forward to the arrival of my KPA1500, an upgrade to my KPA500.  As I wait, I'm looking at ways to attach my 3 antennas to my 2 antenna port KPA1500.  Of course, I can place a manual antenna switch between the amp and one of my existing antennas.  Is there a more elegant way to create a 3rd antenna port that band switches with my K3S?
Dan
AJ9K


Test message G4HUE

ANDY NEHAN
 

Andy


Re: Mic equalisation

David Pratt
 

Thank you, Stewart. I will try that.
My enquiry confirmed that my access to this group worked okay, rather
than merely sending a test message.

73 de David G4DMP G3KEP

In a recent message, Stewart Baker <baker@...> writes

How about using 2 named macros to set the TX EQ for either the front or
rear mic ?
Then assign the macros to a K3 front panel button.
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds. |
| Website: http://www.g4dmp.co.uk |
+ - - - - - - - - - - - - - - - - +


Re: Mic equalisation

Stewart G3RXQ
 

How about using 2 named macros to set the TX EQ for either the front or rear mic ?

Then assign the macros to a K3 front panel button.

73 Stewart G3RXQ - G3Q


Mic equalisation

David Pratt
 

I realise there have been several firmware updates over the years. Is it
now possible to set the microphone equalisation (TX EQ) individually for
both the rear microphone and front microphone jacks? I would like to
use different microphones in the front and rear jacks. They need
different equalisation settings and it is a nuisance having to change
the settings when I change microphones.

73 de David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax, Leeds. |
| Website: http://www.g4dmp.co.uk |
+ - - - - - - - - - - - - - - - - +


Re: Welcome to Groups.io

KA6PNL@...
 

Just checking to see that I am listed also
--
Edwin Vonderbeck KA6PNL
Cal OES 51-511


Re: Welcome to Groups.io

Craig Taylor
 

Good move.
W9OD

Sent from my mini iPad


Thanks

Ray Myers
 

Thanks


Re: Test - move to groups.io

Gary K9GS
 

Please people..every time someone sends one of these it goes to 3000+ people.  Not singling you out John.



73,

Gary K9GS

-------- Original message --------
From: John K Gotwals <john@...>
Date: 3/14/18 3:17 PM (GMT-06:00)
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] Test - move to groups.io

This is N9JG making sure I am subscribed to the group.


Re: Welcome to Groups.io

southdaleus
 

Groups.IO has been merging my emails for me.  They are working on a way we can do it ourselves but not ready yet.

Just email support and they’ll help 

Dale, K9VUJ



On 14, Mar 2018, at 17:56, James F. Boehner, MD via Groups.Io <jboehner01@...> wrote:

Welcome to groups.io.

I have been asked by several individuals to subscribe and unsubscribe their e-mail addresses.

Instead, please use these links found on the home page:



Re: You have been added to Elecraft-K3@groups.io

Stewart G3RXQ
 

Seamless transition...

Thanks

Stewart G3RXQ


Re: Is there an option to change to receiving a summary instead of every single email where anyone posts something.

wb6bee
 

Got it, thanks


-----Original Message-----
From: dalej <dalej2@...>
To: Elecraft-K3 <Elecraft-K3@groups.io>
Sent: Wed, Mar 14, 2018 4:32 pm
Subject: Re: [Elecraft-K3] Is there an option to change to receiving a summary instead of every single email where anyone posts something.

Goto groups.io and your groups.  It’s easy.

Dale, K9VUJ


On 14, Mar 2018, at 15:21, wb6bee via Groups.Io <haywooddc@...> wrote:

If so, I cannot find one in the preferences of this system.

Don

WB6BEE


Welcome to Groups.io

James F. Boehner, MD
 

Welcome to groups.io.

I have been asked by several individuals to subscribe and unsubscribe their e-mail addresses.

Instead, please use these links found on the home page:


Re: Is there an option to change to receiving a summary instead of every single email where anyone posts something.

southdaleus
 

Goto groups.io and your groups.  It’s easy.

Dale, K9VUJ


On 14, Mar 2018, at 15:21, wb6bee via Groups.Io <haywooddc@...> wrote:

If so, I cannot find one in the preferences of this system.

Don

WB6BEE