For sale in Germany (preferably) or Europe: K3/100-F #8232    Factory Assembled, including: KRX3    Sub RX module KFL3A-2.7k    2.7 kHz Roofing Filter in Main RX KFL3A-2.7k    2.7 kHz

Would someone please enlighten me - had my K3 a long time now, with the original KAT3. What benefits would a KAT3A bring over the original. And I’m confused about the bypass relay, since I thought

Wayne - Is there a mod to update the KAT3 to a KAT3A? Is it a simple matter of fitting another Omron G6A-274P-ST15-US 12V relay in the space provided and cutting a couple of tracks on the KAT3

Good morning Joe. Yes, there is a setting for the K3 to recognize the KIO3B in the menu and it is set to normal - KIO3B recognized. Yes, if I plug the LINE IN plug from the microHam device into the

I have found that the ground sleeves of each plug MUST be actually common grounded. The socket sleeves of the Line In and Line Out are not common ground and have circuitry used, I guess, to minimize

Edd, Do you get audio from the K3's internal CODEC with a plug fully inserted in the Line In jack? Inserting a plug in the Line In jack should force U15 to switch audio sources going from the KIO3B

Thanks Joe. I had already noted that and assumed since I installed a new KIO3B board set that they should be okay. But, to verify, I pulled the Audio Board and verified that L10 and L11 show

Wayne Thanks for the response. This is what I have. single wire 148 ft. I was considering bypassing the KAT3 and going to an SEA1613 antenna tuner (used usually for shipboard 2 to 30 MHZ). Instead

Edd, Check L10, L11 on the audio jack PC board. If either of them opens you will not get any audio from the "Line In" jack. 73, ... Joe, W4TV

Definitely! That's what the KAT3A was designed for. (All of our radios embody the Spirit of Field Day, going back to the K2. That means working with crazy, ad-hoc antennas.) There are two ways to use

All Here is an oddball question that I am sure that more experienced K3/KAT3 owners have tried and know the answer. Can I use the KAT3 to tune a random wire? How do you attach a random wire to the

Given the number of requests we've received, we've decided to do another run of KAT3A modules for the K3/K3S. We have a small number in stock, ready to be shipped. Orders beyond that will be filled as

Thanks RIch. DATA A mode MAIN.MIC SEL is set to LINE IN and the MIC control shows Line In and is turned all the way up - no ALC or RF indications. Plugging something into the Line In jack disconnects

A couple of things to check: In DATA A mode, MAIN:MIC SEL must be set to LINE IN. Once this has been done, the K3's MIC control controls the LINE IN level. It must be set to a vlaue other than 0 (LINE

Good morning all. I have a K3 upgraded with the KIO3B and other enhancements that I want to use with a microHam device for digital modes (WSJTX, JTDX, MMTTY). I have spent the last week or more online

Today I added a modified USB volume knob to use it as VFO USB volume knob as VFO

Have a good day. RAS

It's usually because of some power distribution block between the supply and the radio. 73 Mike R 7! Absolutely Awesome

Not often that unintended consequences fall in our favor... BONUS!!! <big smile> ______________________Clay Autery, KY5G(318) 518-1389 On 04/30/20 19:41, Dave Cole wrote:

If we sunk a Chinese container vessel EVERY time we caught counterfeit Chinese crap coming into this county, we could build fake islands out of them all, then claim the islands the dead ships created,