Correct ... K3/KX3 should have been K3/K3S <G>. 73, ... Joe, W4TV

There may be a typo in paragraph 1, sentence 2 below. Add other poor transmitted phase noise rigs: FTdx-3000 (Wipes out 15 meters in Boulder, CO, for example, when an FT-1000MP does NOT.) FT-891

The *BIG PROBLEM* with the KX3/KPA100 vs. the K3 or K3S/100 is the transmit phase noise of the KX3. The KX3 transmitted phase noise is nearly 20 dB *higher* than the K3/KX3 at 2 KHz off of the

. . . or, even better (smaller & cheaper) consider using a K2/100. I've traveled for DX contests - and over the years have hauled lots of different radios, i.e. Collins S-3 Line; FT-1000MP; K2/100,

Is there anyone who wants to sell a KBPF3A General Coverage RX Bandpass Filter board. If so please contact me off list at everettsharp@.... I can use the ones that were used in the K3, as well as the

I just followed the info in the HELP file and put 1500 in the box as suggested. All works for me and does interrupt the KEY line to the amp when the KAT500 is tuning. I don't see any box to "click"

Has anyone ever made the key line interrupt option using the KAT500 utility sticky? If I click the box, everytime I turn off the KAT500 is disables the option. Keith, KV5J

Jeff, Why not a K3/100 instead of the KX3 and amp? Less wiring on the desk, no issues with keying an amp, and you can find them used for around $1700. -John NI0K

I've sold some old radios and other stuff and have some play money to buy another radio for when I make contesting trips to PJ4. I would like something small and easy to carry. I'm thinking about a

Mark, the problem was recording stereo from LINE OUT. One channel was either missing or intermittent. I discovered that pushing laterally on the plug at one angle resulted in constant output on both

Jim - - Very glad to hear the K3 problem is now fixed, with a new audio board, and with it, a new Line Out jack. As for the rest of us, it'd be interesting to learn what the specific problem was with

Thanks Lou for the offer, but just picked one up from another ham. 73's Dave WA2OXZ

KAT500 from SK estate. Helping family with sale of equipment. Ships in factory box, mint condition. Shipped CONUS and insured $425. Pictures upon request. K6ELE glacierkat at gmail dot com

Are still looking for the boards? 73 Lou KE1F Sent from my Galaxy Tab® A

Does anyone have a KXV3 or KXV3A after upgrade for sale? I'm looking to eventually purchase a P3, so I need this module, willing to pay shipping.

Elecraft have agreed to make the change for a future release, such thatthe SWR indicator starts to react around 3W forward power. What a great responsive company! - Paul

I would also appreciate if this change could be made to V2.0. I am using a KX3-KXPA100-KPA1500 setup and it now requires 30W before the KPA1500 SWR indicates when in STBY, I normally run

I want to know about new fan profile before making the change.

In version 2.0, the front panel SWR display no longer works in standbymode unless the forward power is at least 25 watts (aprox). Fortunatelythe remote control program still displays it all the way

Have you tried the traditional energetic pressure release mechanism (at least for the op) otherwise known as a slap? Sorry for your amp, the timing sucks since 160M is actually 'open'