Thanks Danny. I’ll give it a try. Not that I would wish you any ill but I’m glad someone else has had the same issue. I thought I was losing my mind. 73 George W3GP

No need to apologize for lending a hand. I thought there might have been some hidden slider that I inadvertently moved. 73 George

Hi Joe and George First, ckeck your clocking Second,Close WSJT-X, rename the ini file, restart WSJT-X and reconfig like new installation. I had the same problem last year in Zone 2, After coming

George, I apologize. I was wrong. I was in a hurry and thinking of something else. The urge to help exceeded the urge to research my answer first. Sorry. Joe / AJ3O

Gentlemen After further investigation my situation appears to be a bit more bizarre. Normally I run FT8 using a K3s/KPA500 but, as I also have an IC-7300, I have a WSJT configuration for that radio as

Right click on the SPKR icon in the lower right of the PC. Then select OPEN SOUND SETTINGS. Then under INPUT select DEVICE Properties., Under LEVELS set the slider to about mid scale. It will say

Just a quick question. Did you accidentally click and drag the slider within WSJT-X? Only asking because I have done something similar.

* On 2019 02 Apr 18:56 -0500, Mark Erbaugh wrote: Glad to see that got you going. 73, Nate, N0NB -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears

i have used WSJT-X successfully for months now and, suddenly, I have no receive audio showing up on the WSJT waterfall (complete flatline and nothing on the “thermometer” on the lower left of the

Nate, It took me a while to get to try your suggestions, but they worked perfectly. Thanks. 73, Mark

Some time ago I noticed that my K3/0 created two USB ports (/dev/cu.usbserial-00001114A and /dev/cu.usbserial-00001114B) once it is connected to my Mac. Communication (K3 utilities, RHR Helper, ...)

I have been running Linux Mint for some time. I would contact the original writer of the program you installed. The purpose of the files will determine if you only have to name the file or copy the

* On 2019 25 Mar 17:33 -0500, Mark Erbaugh wrote: As already mentioned, "multiarch" needs to be enabled so that "i386" packages may be installed. I have documented the steps

I just hit this issue with libgtk-x11 a couple days ago. You have to install the i386 (32 bit) version of the library. I don't know what tool mint uses, be it apt or yum or what, but on debian I

I recently connected my K3 line to a computer running 64-bit Linux Mint 19. I downloaded the K3, P3, KAT500 and KPA500 utilities. The K3 and KAT500 utilities run fine. The P3 utility reports a

13.4 VDC is low. Can you tweak it up to 14 VDC? Avoid sources of loss in the lead by removing any in-line fuses. Check all the connections. The indicator has nothing to do with the coin cell which

I had this with my K3. I found that I had somehow moved the voltage control on the power supply. Resetting to 13.8v the warning went away. Look in this area before anything else. Stuart, GD0OUD.

KF7P has some nice stuff. Ferrite choke kits for coax, USB, and ethernet Ferrite choke kits for coax, USB, and ethernet

Nothing if you order from Digikey and pay with a check. Free shipping and handling. Check their terms of service. -Bob N3XKB

What did they nick you for shipping 10 of them? 73s and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Technical Specialist ARRL Volunteer Examiner ARRL OOC for Oregon