Hi Paul, I am presently running from my remote station in New York to my local control station in California using the Elecraft twins, (K3 at remote and K3Ø at control. So far I have had no trouble

I run a 1KW homebrew solid state linear with my K3 for my remote station. I don't use a K3/0 but I also had to deal with RFI. Buy about a dozen 2.4" 34 mix ferrites and put them on every cable!

Paul…….. If he was running POWER, them Ferrite Beads is the best approach, Cable Routing (AC / DC & Coax-Separate ) in the TX location and Equipment Grounding should be reviewed. Was a

Hi Ray I will send him your reply via email (also I am getting him to sign up on groups.io). I failed to mention that he is using remote rig hardware. Thank you for your time to help us. 73 Paul

Hi Paul...... There should be Some “Error or Fault” messages displayed ? Drop outs that I see are...... RF Power getting back into the Equipment ...OR .... Power Supply Over Heat / Saging

Hello, i worked a station on 40m cw last night that was using a K3/0 mini (control) and K3S (remote site) that dropped out three times during our 45 minute QSO. He said the problem is not present on

The SVGA technology is old, but works very will with the P3, IMHO. HDMI means the company adding it has to pay a license fee. I was not aware of this until recently. Wow you have quite a setup.

I have that on all three of my P3’s.. Hi Hi I Just think that VGA is awful old technology. I have two K3S’s 10853 and 10858 and a 2971 K3, KPA500, KAT500, KPA1500 and 5 SP3’s so I’m far over

Ken, It's really minor but I'm keenly aware of it. When I first tried the KPOD I often had cases where a button press would elicit a beep without a corresponding action from the K3S. I complained to

I wonder what you mean when you say the K3 has a lot of life in it? I don’t look at a radio as having a life, but I also look at a radio for it’s usefulness. If you are just looking for new

I wouldn’t hold your breath yet… Dale, k9vuj

Yes. The Flex SmartSDR software will focus on the total bandwidth. If I’m seriously trying to work someone, or in a contest on a crowded band I would operate single channel/single band. But if one

K4 has been a almost standing joke here for quite sometime. The K3S still has a lot of life in it, just as my K3 does. That said Wayne, Eric and all don't let weeds grow between their toes. I am

Well I like what I have with the K3S with the excellent receivers and the idea that I can add options when I want. It would be nice with the P3 to have mouse capabilities and maybe the K3’s menu

Wes, Thanks for your input. I would find the latency annoying too (and a show stopper). 73, Ken N4KS

I agree with Warren that more than two slices presents UI issues. But it also depends on how you define "slice." Here is how I would optimize the use of slices. This is just a proposed underlying

Unless the radio -- in some variants -- provides an independent set of band-pass filters for the second ADC. That's how we would do it. Wayne N6KR

Dennis, I have the Elecraft KAT500 and KPA500 utilities running under Ubuntu 18.x. Everything works except the ON/OFF. I can turn the units off but can't turn them back on. Any ideas? Norm

I've used both the Windows and Linux remote software for the KAT500 and KPA500. The Linux version does not let you remotely power up and down the radio. Once powered off, the Linux PC no longer sees

Sure, I do it. It turns out though that I seldom use them because there is a touch of latency that annoys me. Wes N7WS