Here's the link to the K3?K3S options pre-order interest form. https://elecraft.com/pages/k3-k3s-options-interest-form de K0DTJ

I think there’s an interest signup list for various K3s boards/options. They’ve said that if there’s sufficient interest, another production run may be made although there’s no commitment on

Are you sure Paul. When I go to Price List/ Order it says “Sold out.” If you found it elsewhere on the site perhaps you could send me the link 73 George

George I was looking at the Elecraft site yesterday for K3 parts available now (Filters etc) and I believe the K3 ATU is available for you to order. Paul

Can a KLPA3A be retrofitted into a K3...as well as a K3S?

BAND CHG, which toggles between NOR and STDBY Tom W4KX

There is a setting on the KPA500 that puts the amp in Standby when you change bands. Check that setting. I don’t remember the exact name of it. Mike, W0IH

KPA3A has been sold...

The KPA3A is brand new and the KLPA3A is used and has a new power transistor. I'm after AU$400 for the KPA3A and AU$50 for the KLPA3A. I'm in VK but happy to post to USA or EU. Cost is about AU$40

Is anything listed under "Other Devices"? With the USB cable plugged in -- right-click on the name of your computer (at the top) in Device Mangler then select "Scan for hardware changes".

I looked in there. There is nothing shown indicating any sort of com port. NADA Plugging the usb cable in and removing it, I see nothing change. Larry Sent from my Verizon, Samsung Galaxy smartphone

For some reason that didn't happen here.  Maybe i should go an download it again.  I thought it a bit strange that no com port would show up.  Looking in device manager, no com ports are shown at

I run Windows 10Pro 64 bit.   I find the driver automatically loads when the device is plugged in. 73 Bob K4TAX -- This email has been checked for viruses by AVG. https://www.avg.com

Got that all taken care of Bill. Larry W0OGH On 1/30/2021 10:20 AM, Bill Maddock via groups.io wrote:

I just helped a friend work through this one yesterday. Open the Device Manager on your Win 10 system. Make sure you are launching the application with an account that has Administrator rights. Is

I have a K3 and a KPA1500 connected via the Elecraft AUX cable. All was working well but I now have a situation that when I turn on the radio (and amp which powers on with the radio), the second line

I encountered some problems yesterday posting my reply, but it looks like Jim K9YC had the same idea as me - you are most likely plugging a 3-connector audio cable into a 4-connector audio jack on

Search for and download an FTDI driver for Windows. Then convince Windows that you really, really, want it installed. If you are relentless enough, often enough, COM3 will appear and the Elecraft

Use the Win device manager to see if it creates a comm port. Plug and unplug the usb cable to see if it comes and goes. Make sure port speeds are set the same between the computer and the utility. GL!

I downloaded the KX3 utility into my laptop this morning.  It's a WIN 10 system. I also have the KXUSB cable that came with the KX3 when i bought it 2 years ago.  After downloading the utility