Oops - skipped past the "Mac OS" in the title. There must be a Mac equivalent to the Windows sound card level adjustment - sorry, I don't know what it is, but it's provided by the operating

In the K3S, make sure CONFIG:LIN OUT is not set to zero; that's the radio's level control for receive audio to the audio codec. A setting in the range 5-10 works for me. Then, to make further fine

Jim, I'm using Windows 10. You can right click on the little speaker icon at the bottom right corner near the clock and pull to "open sound settings". From there you can select the usb audio

Hi Ray, When you say "Check" what am I checking for? Like I said, it works fine with WSJT, but fldigi doesn't seem to be picking up the signal.

Hi Bob, So what IS the right sound device? I'm using the USB Audio Codec, which I thought was correct. How do I turn up the "volume"? I'm seeing any setting for that in fldigi nor on the radio.

HI, OK, but when you say "check" what am I checking? What's the proper setting? Everything was at default and I haven't changed much, especially stuff I don't understand.

Hello again, Both meters were sold and shipped out this morning. Knut

Hi all, I have two of these SWR/wattmeters for sale. They have been sitting unused for a while since I now have two LP-100A meters, one for the shack and one for the to go / spare station. These are

Adding another K3 Mini - do you have one to sell? Please direct mail to me - thanks - '73 es gud dxing -- Don N4HH

Thanks for clearing this up for me Charlie 73, Jim VE7FO

Did 2 years ago a video about that K3 SDRPLAY and with the search function in the group you would find this in the group

Try something like this: F11 Spot,{CAT1ASC SWT42;} -Bob N3XKB

SDR-Console works very well when using omnirig and an SDRPlay.

Has anybody used a K3 with SDR Console v3? http://www.sdr-radio.com I would appreciate any comments and experiences. Thanks and 73, Gerry, W0GV

You can use this simple interface to key K3 also http://www.k8zt.com/KX3__N1MM_interfaces.jpg -- Anthony Luscre K8ZT Ohio Section Section Youth Coordinator & Education Outreach ARRL - The National

A $15 FTDI USB-Serial adaptor and a home-brew (about $0.50 in parts) keying adapter that has 1 transistor for PTT or the deluxe 2-transistor model that does PTT and Keyer. You don't need anything

I have Microham gear in my shack. Portable I use K1EL keyer. Gerard

First I'd like to thank all everyone that bought my DDU. I have had some great feedback. I had an email last week asking me if my DDU would work with their W1 watt meter. The model I am selling now

I use microHam Digi Keyer ll. 73, Chris NU1O

On my home pc: I use a straight RS232 cable to DB9 connectors on K3 and pc. CW and PTT run over pins 4 and 7 of the same cable. So CAT and PTT/CW over same cable. On my laptop: USB-serial converter.