I would like to order the P3 Transmit Monitor Mod to check outputs from not just the K3 but other HF transmitters that I have on my desk. I have hesitated actually placing the order after reading the

I use a quarter wave inverted L on 160 meters. It fits on my property. The dimensions are about 40 feet up, and 90 feet over. It matches well with my tuner. I just have it grounded to my

No question, there are better alternatives, however, when you live in a HOA you have to go with what you can get by with. I have a 80 meter horizontal loop that gives me everything through 6 meters,

Agreed. A 40 to 60 foot fat tower and a good ground system will be much better.

Don't bother. The E-H antenna (also known as the Cross Field Antenna) has been debunked. Independent investigators could never achieve the claimed results in the field and NEC based modelling does

Bill, Thanks for the reply a EH antenna, is quite different from what you thought it was. Here is a link that describes a EH antenna. Everett N4CY

Are you thinking of Endfeed Halfwave? N4dj has plans for a 160 meter Endfeed long wire ant that works well. But it's not a half-wave. ...nr4c. bill

Sorry guys, I sent this to the wrong group. Everett N4CY

I am new to this group and have read most of the articles in the files section and several of the articles that are posted on the web. I plan on building a 160 meter EH antenna and was wondering if

I want to send memories 1-8 using a keyboard on the P3. Easy enough. Switching memory banks also easy. When I try to switch to bank 2, send a memory and switch to bank 1, the message stops playing

I believe this is a YAHOO GROUP for the K3. Not the Elecraft sponsored reflector on QTH. ...nr4c. bill

Hi Rodger, This Yahoo Group is certainly read and contributed to by Elecraft staff but the main ‘Elecraft Reflector’ is generally moderated by Eric Swartz at Elecraft and hosted by QTH.com The

Yes, you're wrong, Rodger ;-). See any of your Elecraft manuals or the elecraft.com website for details on how to register. If it's just the K3 you're interested in you are probably better off here.

The reflector that is maintained by Wayne and Eric is here: <http://www.elecraft.com/elist.html> As for me, I signed up for both, this one and the Elecraft managed list. I get that list in digest

How many Elecraft reflectors are there ? ....In a recent message on this reflector I see a reference to the main 'Elecraft Reflector', I thought this was it or am I wrong.? Thanks, Rodger/GM3JOB

Here is what Wayne posted back on July 11th about this: The K3 and K3S both use all 400 counts of the VFO A and B encoders (100 pulses/track/revolution). The K-Pod defaults to 200 counts. During our

elecraft has responded to this observation on the main Elecraft reflector. This is the way it is set up in firmware right now, but may be changed in future firmware. 73, Bruce N1RX

I recently received my K Pod and set it up. However the tuning rate using the K Pod knob is half the rate of the K3 knob. The K3 tunes 1 KC per revolution but the K Pod only tunes .5 KC per

Mike, I have also found the K3 NB to be ineffective on strong electric fence pulses, using normal settings. The only fix which I have found that works for CW (apart from changing rig) is the technique

I appreciate everyone's suggestions but alas nothing seems to unfreeze my VFO A short of using software like win4k3suite to control it. I'll have to wait until later this summer to send it to