Has anyone figured out how to play K3 DVR voice files, normally activated by pushing M1-M4, via the F keys in N1MM+? I never have used .wav files with N1MM+. I would like to assign M1 to F4, M3 to

Carl - you're in the wrong thread unless you can help me with my problem John WB5THT

I now have full support in Pegasus Plus Beta for the Behringer CMD Micro DJ Controller. This device has 10 knobs and 20 buttons offering ultimate knob control for your radio. All the knobs and

There was no split indication. I changed transmit to VFO B and we stayed in the selected mode on transmit. This happened last week, I power cycled the K3S and we were back to normal but that didn't

if you are in split the second vfo can be in cw. that happens from time to time. barry NF1O From: Elecraft_K3@... To: Elecraft_K3@... Date: Mon, 29 Feb 2016 17:57:47 -0800 Subject: [Elecraft_K3]

What the heck? I was trying to check into a net this evening on 75M and when it was my turn, I transmitted and then discovered the K3S switched to CW . At first I thought it might have something to

Hi Alan, With thisPCI comport the P3 Utility connected OK but when trying updating said no connectionand no way, I repeat it several times with no success, changing to a motherboardcomport made the

All interesting and no doubt true, but this whole thread is essentially irrelevant to the issues of SO2R operation. Antennas and filters. Antennas and filters. 73, Drew K3PA

Thank you for the redux on what happened, so often one never hears what happened to correct the issue. -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW

I'm posting to document a problem I had with sudden total loss of transmit output power on my K3. SN#7060. It took a couple days to troubleshoot with Elecraft support. Hopefully this will save

Don, Thank you. Very interesting information. 73, Bob Nobis - N7RJN n7rjn@...

I've done shielding effectiveness measurements professionally. My experience is that while a certain "super wiz-bang" cable might have a 90dB rating, it is virtually impossible to realize that

I wanted to let you know that George Fritkin died on Wednesday. He had a lot of the latest and greatest Elecraft equipment which I would like to sell. If anyone is interested please contact Ruth

Jaime, If it works with a K3 it should work with a P3. What are the symptoms? Can you send/receive commands to the P3 using P3 Utility? Alan N1AL

After I quit Rumlog, the utility found the K3. Carl Yaffey K8NU Recording studio. cyaffeyNO_SPAM@... 614 268 6353, Columbus

I think I've seen this before but it's usually the high bands. Glad that fixed it. 73 Mike R Find me on "Zello", a walkie talkie or handi talkie type app. I'm listed as KE5GBC. I'm mostly on late at

I have a Palstar dummy load that works with the tx cal until I get to six meters, then it faults. So, I use my Drake dummy load when ever I do a tx cal, which works all the way to six. Dale,

The TX gain calibration fixed it, Mike. The ATU was off, and I’d tried two dummy loads, both connected directly, as well as antennas. I don’t know why the calibration was necessary, but I’m

Suddenly, the K3 utility on my mac mini (running OS X 10.11.3 El Capitan) can’t connect to my K3. It’s been fine since I first connected things a year or so ago. Interestingly, RumlogNG connects

Sounds weird. I'd verify dummy load with another source and maybe antennas. Do you have the ATU? Could be a problem there. You may want to run Tx Gain Calibration. 73 Mike R Find me on "Zello", a