You are most welcome, I just love the macros on the P3/K3  now that I can fire them form the Genovation pad...   It's like having the most useful controls all exposed at once.  I have a button

Hi, That is a question that needs testing to answer...  I can think of a few reasons it won't work, and a few as to why it should...   I will be doing some testing on it in the upcoming

Go for it! ...nr4c. bill

Thanks for all the help, I have received direction to the drivers required for XP via Elecraft support, many thanks to them for the prompt attention. I am just about to make my mind up to go for a

I'm looking for a K2/10 (QRP) in perfect condition. Preferably but not necessary with high serial number. With options (at least): * KAT2 * KSB2 * either KAF2 or KDSP2 * KNB2 (desirable)

PJ, How'd you connect to the kx3?

Be sure and set the RS232 CONFIG setting to "USB" and not a baud rate, like 38400 or 4800 baud. The radio must be plugged in and ON for the Utility to recognize it. ...nr4c. bill

I have a Genovations keypad working directly into a KX3 and I am wondering the same thing. I do not have a P3 but the P3 plus the VGA board seems a bit extreme. P. J. Hicks, N7PXY

Thanks Dave...I built a macro similar to yours and it works. Steve AG2J

Is there any reason that the Genovation could not be used to send commands directly to the K3? Doing it that way would not require purchasing the nearly $300 VGA board for the P3? Bill W2BLC K-Line

Paul, In the device manager window(s) it should have detected a USB hub, a USB soundcard, and an FTDI USB <-> RS232 chip. The hub and soundcard require nothing other than what is

SWT13;SWT13;FT1;UPB7;RT0;XT0; Will give you split up 5 KHz., and FT0;RT0;XT0;LN0; Will clean up after split... -- 73's, and thanks, Dave For software/hardware reviews

Use the split + 5 macro, and just dial a bit further... -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW support

10 kHz is the limit for RIT/XIT, but you can go as far as you'd like using SPLIT. 73, Wayne N6KR

Thanks Bill but your approach doesn't work for K3 with one receiver. There must be some way of using macros to solve this.

RIT -10/ XIT +10? Or just use SPLIT ! ...nr4c. bill

Well i tried to connect my friends K3S to an Xp sp3 laptop and according to the device manager it has detected something connected to it but has no idea what it is. we ran the Elecraft utility

Hello Gents, I have completed testing on the CP24USBHID upgrade software and am happy to report it appears to work flawlessly in allowing the Genovation 24 Key pad, (CP24USBHID), to send macro

In response to numerous requests from customers this week for a little more time to beat the scheduled price changes with their orders, we have moved the date for the changes a few days later to this

Hopefully, this is not a dumb question. Is there a way to extend the RIT/XIT offset on the K3 with only one receiver? The current configuration is +/- 0 to 10KHz. I'd like to double