Care to explain? Mine seems to work just fine. What issues are you having? I have K3S with sub and DVR and some filters. Using CM500 mic plugged in rear mic jack. Mic sel is RPL BIAS and I have mic

Also some USB devices and cords can cause noise at times so lookout for that. Try unplugging or powering off nearby devices. Good luck. 73 Mike R Find me on "Zello", a walkie talkie or handi talkie

< I was very happy with but wanted to go 2015 technology.> WHY? Tony, if you are still on the fence. Send me an email at my call at arrl dot net. I think the whole 'labelling' thing SDR gen 1 vs SDR

Hi, I am strongly considering getting a K3S. I would really like to see one and hear one first though. I am in Killingly, CT (NE CT). If there are any owners driving distance from there and

I would like to talk to a K3S owner who has easy access to the rear panel and can plug a headset into the back, and still transmit SSB. Dick, K8ZTT

Tony, Are you still undecided?

Hi Mel, interesting idea, i will try that, tnx, 73 Bozidar,S50BN

it does with an external transverter so i would bet it does. i have a 222 mhz transverter and it works fb. barry nf1o From: Elecraft_K3@... To: Elecraft_K3@... Date: Fri, 2 Oct 2015 09:25:52

Ok David ! Have a nice week-end, Rudi

Everything that the utility says to do

Does the P3 work (show the 2 meter band) with the K3S with the 2 meter module? 73 Frank WA3RSL

David, after installing the K3 utility and copying the latest versions from Elecraft site, i've just a last question: Can i update all FW or are some updates only compatible with K3 hardware

Thank you David for your quick reply and info. My best 73, Rudi

Got to here: http://www.elecraft.com/K3/k3_software.htm Download K3 utility first & install, configure for K3 serial port then use it to download firmware and then load it into K3. 73 David G3YYD

Hello, I've an "old" K3 (#1212) and also an old FW: dr 00.00 d1 02.49 d2 00.00 FL 01.06 uC 03.68 No hardware modifications were done. To use a particular SW, i need the SMH command

Hallo Mike, i simply don`t know what make this hiss. One interesting thing, i forgot to tell, is that hiss is constant present but slightly vary in strength. I have try to put some resistance in

Might I ask if you have tried to isolate the source? In the tube days a gentle hiss was attributed to the electron bombardment of the plate from the cathode and was never "completely" eliminated.

I tried this on k3 5047 using some cheap earbuds and I plugged in my dusty cm500's. I can barely detect anything, even less so with the cm500. Plugged into the external speaker jack. Is it possible

He already has a k3, so I guess he's asking for advice on the k3s with the kind of operating he does. I don't know if a k3s would be that beneficial someone not doing cw. What do others think. He

If one doesn't need the upgraded sync board for MARS then the 7200 would fill the bill. I have both and I am in MARS and use both for MARS, both work well in that application. I also DX and for that