Id check publish date and use the latest. KAT3 is no longer available with introduction of KAT3a I think. ...nr4c. bill

Or you can have the amp eavesdrop on the transmitted RS232 data, which is still sent to the RJ45 jack even if you have the computer connected to the KIO3B's USB port. 73, Wayne N6KR

Bill, If you order the antenna tuner at the same time as the K3(S), you will not receive the KANT3, and have to install the KAT3 when you build the kit. The installation is very simple, just

I notice, as an example, the KAT3 Autotuner has instructions packed with that board AND there are instructions in the kit assembly manual for the same device. Which one do I use? 73's Bill,

From the N1MM Logger documentation (<http://n1mmplus.hamdocs.com/tiki-index.php?page=Key+Assignments+-+Keyboard+Shortcuts#Key_Assignments_Short_List>) : Ctrl+Alt+S . 73, Rich VE3KI ---In

Hello to all on the group. I have decided to sell my KX3 s/n 1033. I simply do not use it enough to justify keeping it on the shelf. I am asking $1200 for the radio, or $1,500 for the radio + carry

The K3 can be put into Split mode using CTRL-S from N1MM.Does anyone know if there is a similar command to take the K3 out of split modefrom N1MM, please? Many thanks, 73, Peter, G4BVH

Hi Rick, Thank you for your suggestion. The amp does indeed accept band data - I'll cook up a cable and see if I can get it to work 73

Does your amp accept 4-line "BCD" band data or does it insist on using a serial data stream? I've always used the band data from the K3 ACC socket, cascading true-15 pin Y-connectors as necessary to

Thanks Joe, found the peak hold. Still on my P3 the blue modulation line is a slow arc but unless you are looking at the really low audio tones, -500 Hz, which are about -12 dB, the rest of the audio

Guys, I was able to get the K3 to stop keying up, but I think Ihave a sound card issue, which I don’t know how to fix. I only have twoselections when I am in the DM780 program options, sound card

Guys, I need some help, Ican’t get my K3 to transmit using a Signal Link USB and HRD, with DM780. I amable to receive fine PSK-31 with out any problem. The TX ”LED” lights up when I send a CQ,

I think you may find that the RS232 OUTPUT is active when on USB so the data going TO the USB port MAY still be going out the RS232 Tx data pin as well. But the ACC connector is definitely

Just received a new K3S serial number 10015. I have moved to this radio from a TS990 . Obviously very different radios, but so far I am impressed. I will say one big disappointment is that it seems

Peak Hold and Average are completely different settings. If you are setting average to 20, you are not using peak hold. I have run peak-hold while watching several of the local AM stations. The

Mine arrived five minutes ago. Haven't even opened the box yet. After taking it out of the UPS guy's hands, I had to wash mine and damp wipe the box. I think UPS uses their trucks to

OK, as stated, I ran the peak hold which actually the average with a setting of 20. No difference, sorry. You have to perform the test to see it your self. No more on this thread unless P3 tech

Are you using the peak hold mode for voice modulation as Al ask and I told you how to enable? There is a significant difference between a static display of 1 KHz modulation and the dynamic display of

Yes, Joe, But the difference is the display is the question. WHY? My 8920 show proper power distribution on the sidebands, the P 3does not!!!!!!! Mel, K6KBE

My card was charged on Wednesday and the radio went onto the UPS truck Thursday night. I'm expecting it next Thursday. It'll be my first-ever Elecraft product so I'm anxious to start playing once I