I think you may find that the RS232 OUTPUT is active when on USB so the data going TO the USB port MAY still be going out the RS232 Tx data pin as well. But the ACC connector is definitely

Just received a new K3S serial number 10015. I have moved to this radio from a TS990 . Obviously very different radios, but so far I am impressed. I will say one big disappointment is that it seems

Peak Hold and Average are completely different settings. If you are setting average to 20, you are not using peak hold. I have run peak-hold while watching several of the local AM stations. The

Mine arrived five minutes ago. Haven't even opened the box yet. After taking it out of the UPS guy's hands, I had to wash mine and damp wipe the box. I think UPS uses their trucks to

OK, as stated, I ran the peak hold which actually the average with a setting of 20. No difference, sorry. You have to perform the test to see it your self. No more on this thread unless P3 tech

Are you using the peak hold mode for voice modulation as Al ask and I told you how to enable? There is a significant difference between a static display of 1 KHz modulation and the dynamic display of

Yes, Joe, But the difference is the display is the question. WHY? My 8920 show proper power distribution on the sidebands, the P 3does not!!!!!!! Mel, K6KBE From: "'Joe Subich, W4TV'

My card was charged on Wednesday and the radio went onto the UPS truck Thursday night. I'm expecting it next Thursday. It'll be my first-ever Elecraft product so I'm anxious to start playing once I

Which is, of course, illegal as soon as he modulates the transmitter. A 100% modulated 1 KW AM signal is 4KW PEP ... the legal limit (in the US) for AM is now 375 W carrier => 1500 W PEP just like

Added note. In my lab, I set up the following: Advert 7200A signal generator and HP 8920A analyzer. All tests prove that a AM 100 % modulation carrier the sidebands are ALWAYS 6 dB down from the

… I’d love to hear the answers from somebody who really knows… by my speculation is that they need to drop the power output on AM because it emits a steady carrier, while in SSB mode those peaks

OK, Alan, Thanks for the input. Here goes. I am monitoring a friend near by, 15 miles. I took care to have him set up the 100 W SSB station and his 1KW AM station like this. In CW mode, send a 100 W

serial number 10004 On 7/3/2015 6:52 AM, Steven Stuckey ac9gkx@... [Elecraft_K3] wrote:

Bill, Cool and thanks I am still waiting for mine. 73 Steven AC9GK -- Steven Stuckey - AC9GK - Indiana

I think very small frequency drift is a function of the ADF4001. Starting at page 6, Read the ADF4001 data sheet. You can download it from Analog Devices web page. Jack WA9FVP Willco Electronics.

ordered on 5/7, (actually ordered a k3 ,was told there was none available they were waiting for parts told to check back in about a week or so and they would see if the parts

Bill yes serial number. Steven Stuckey AC9GK On Jul 2, 2015 10:14 PM, "William Conkling bconk75@... [Elecraft_K3]" <Elecraft_K3@...> wrote:

Hi Mel, I'm trying to understand the test conditions. Are the 100W SSB signal and the 1 kW AM signal transmitted from the same station on the same antenna? If not, then no direct comparison can be

Serial number? ...nr4c. bill

Hi, I installed a pair of the new LO boards a few weeks ago, and today was playing around with watching the frequency stability of the K3. I didn't expect to see any changes as a result of the new