Training is the key here I'm afraid. The first year I brought my K3 to FD I made a quick guide that explained a few things like this Made sure to stress "TAP" vs. "PRESS&HOLD". Also discussed

Hi all, If you're at Dayton, please stop by the kit forum at 11:45 this morning in room 5. Joe (K0NEB) always does a great job, and there will be a couple of other presenters. I'll show a K3S and

Run down is an understatement on the facilities.. (It is in competition with municipally owned convention centers and assorted other facilities in the area.. It started life as a ice rink for a pro

Heh.. Last year there were a few food items that were freshly made (pizza being one of them... and were fairly tastey. Perhaps not really GOOD for you, but then most folk would put a mile on their

I don't believe this is possible with the current firmware - it would require some amount of change and would probably be best achieved with a config option to allow you to disable any function,

Not quite sure what you are "just sayin'" by that "human" remark, but you seem to be suggesting that Elecraft enters into the second-hand dealer space, maybe selling reconditioned K3s (K3's?) with

Maybe Elecraft could provide/specify a "K3 Trade-in" option. 'Twould make upgrading to a K3s much simpler, if Elecraft could do so without taking a significant financial hit. Also it would seem to

I would be VERY interested in learning how to do this for the same reason. 73, Jim VE7FO

Dayton, "a must do" experience for all Hams, not unlike a (dare I say it in today's PC climate) a Muslim's mandated pilgrimage to Mecca. Went to the Dayton2013 event and really had a marvelous

Your friend is almost 100% correct. He misses the mark on "low end truck stop food". It would require considerable improvement to reach that status. 73, Bob K2TK

Next week we'll add this info to the FAQ. Short answer: yes, you could move your KAT3 and KRX3 to a K3S. 73, Wayne N5KR ----http://www.elecraft.com

Just ordered a fairly loaded K3S. I'm personally thrilled to have the new USB port on the back. It makes it much easier to concurrently connect peripherals such as amplifiers and computers. In

ACC connector, pin 10, KEYOUT-LP. See page 18 of the operators manual. Bruce N1RX

>>> The box is not much big, <<< The DOG House is also "not too much big" I feel your Pain! BTW! If you need to blame on on someone. Blame it on Wayne! ;-) ((((73)))) Milverton / W9MMS.

Jack, Thats a very good question ! Bob K6UJ

Show her the new K3 and point out the differences in the front panel then explain to her it is a new prototype K3 and you have agreed to testing it. -:) Bob K6UJ

That shouldn't be a problem if you are a slippery type person, like a used car salesperson (no disrespect of used car salespersons intended). A PP account should hide the devious purchase. Dale,

You can't upgrade a 3 to a 3S. Some (not all) modules can be upgraded, and I think Elecraft has always done that if you don't want to do it yourself. Grant NQ5T Is there a option to send your K3 to

You guys haven't been around long enough to have "Your money, my money and our money" accounts? It saves ever having to deal with those issues. Just my two cents towards marital bliss :) Tom

Is there a option to send your K3 to Electra ft to upgrade to K3S? Jack W4GRJ Sent from my T-Mobile 4G LTE Device