<wa6hhq_lists@...> wrote: Tnxs for the update on the K3. I am wandering if the KNB3 noise blanker has been tested in the Los Vagas area. I have a friend who has tried many things: internal NB to his

Received my copy of NCJ yesterday with a NICE write up from one of the beta testers. Looks like the rig is well worth the wait!!! 73 Lew K4HR <wa6hhq_lists@...> wrote: ran September in

K3 Status Update: August 29, 2007 Note from Eric: I apologize for not posting earlier. I planned on posting an update for everyone before I left town for the JA Ham Fair last week, but ran out of

Just found this on Elecraft web site: 1st Production Run K3 shipments are currently targeted to begin September 17. Sold out. Guess we wait a bit longer.

When I read: <http://lists.contesting.com/pipermail/topband/2007-August/027093.html> it sounds to me like the the 31st of August may still be a bit too early for the first shipments. At least we

Tree, N6TR, is a K3 beta tester, and he has posted some positive things about it on the contesting.com topband reflector (http://lists.contesting.com/pipermail/topband/2007-August/027093.html ).

Thanks, that actually looks promising (that they have been taking the issue seriously). 73 AB2TC - Knut

http://www.elecraft.com/K3/K3FAQ.htm#noise%20blanker More than this - time will tell... vy 73 de toby

Hi, Does anybody know anything about the noise blanker on the K3? The brochure promises both hardware and DSP noise blankers. I am plagued by power line noise quite frequently and the (hardware) NB

That would be nice. I'm assuming the K# will have true diversity dual receive. Dave http://www.dxengineering.com/Products.asp?ID={6F07CEB4-27D0-4664-A2AA-352A69ED88CD}&SecID=114&DeptID=12

Thanks Dave, it looks nice. I use one I built a number of years ago. I was just thinking that it would probably be easy to add that capability to the K3 using only firmware... maybe even make

This one works Dave http://www.dxengineering.com/Products.asp?ID={6F07CEB4-27D0-4664-A2AA-352A69ED88CD}&SecID=114&DeptID=12 antenna, very

I would also like to see a DSP implementation of a noise canceller similar in concept to the MFJ-1026, which samples QRN on an aux antenna, and subtracts that from the signal on the main antenna. It

Al, I'm somewhat in the same boat. My wife (K8AJ), has bought me 2 K2's, the power amp/tuner, transvertors etc. As much as I like the K2's, I wanted something for SSB VHF/UHF, so last year for our

Tom, 3 weeks, if things work right. Since I retired last yearI have been overloading with all kinds of projects that I have been savingup. I ordered the K3 back in April and was looking forward to

OK, I get the message. I was reacting to the (many) comments that they hadto get the idea of another rig past the YL/YF. In my case the YF is a hamalso, and the first thing she see's in the morning,

There are 2 mic inputs, one on the rear too - and you can switch between them and I believe, make gain settings etc for each. I plan to use my HM10-Dual via rear and Proset/Handmic via front On

Hi all, A thought passed through my mind last night, as these things are prone to do :-) Would it be possible to save different settings for the mic? For example, from home I tend to use a Heil

Yep, I've had a full sized pic of the rig hanging on my bookcase since March (when I ordered it), with the lines: Coming to a shack near you soon .... But not soon enough! On 8/8/07 19:52,

My concern is this: 1. I build the K3. 2. It starts on my side of the room. 3. About once a week, the K3 "moves" over 6 inches. Somehow. 4. K8AJ maintains she has no knowledge of anything