I'm still using the Sony boombox speakers from Goodwill directly driven by K3 EXT SPKR amp. No wall warts!

Did this topic start out as field day tips and changed somehow? My system is lumping this signal link thread into the other. 73 Mike R Play me some fiddle, but no stinkin' violin! Amateur/Ham

Thanks to all for your info and suggestions. My SignaLink should arrive in a few days. I'll be trying it with MixW software and see how that goes. I'm disabled and will get a friend to plug it in this

Steve, Jump in! SignaLink USB works just fine with digital modes and the K3. Been using them for over a year now. Besides following the Tigertronics manual, thereare a few things: One thing

I use a pair of M-Audio AV40 studio monitors. They sound terrific with the K3! -- Thx & 73, Eric / WV3E

bxvbl http://dehesa-serrana.com/nfg/embd/swqmc/jnb.htm Mel Farrer chp

If you decide you're going to spend some time on digital modes and you don't yet have a separate soundcard for them, you should probably get one. However, if you have or ever intend to get a subRX for

Jim, You do not need additional hardware as you can use two cables from radio to computer soundcard and work digital signals. - Tony, N3ME - 118 Ashwood Street Bethany Beach, DE

I use a SignaLink into the K3. I no longer transmit incoming Skype noises, DX alarms, OS noises or similar 'stuff' but instead hear them only in the shack. Plus I'm not constantly mucking about with

For me, and how I operate, the Signalink is necessary for three reasons: 1. The Signalink as a sound device is better quality than the old, noisy one in my PC. 2. I like the easy access to TX/RX

I've been thinking the same thing.� Elecraft even sells the cables for this purpose. I bought a set to see if I like working the digital modes, before I invest $100-200 in the SignaLink

I use two Jensen 6X9 stereo speakers in rectangular fuzzy black boxes from the automotive audio store. One on each channel.

The third batch of 700 Hz filters has just about sold out. Given their 12-week manufacturing lead-time, once they're gone it will be several months at least and quite possibly early next year, before

Use a set of stereo speakers. DONOT PLUG A MONO PLUG INTO SPEAKER JACK. Read manual about this. ...bill nr4c

Steve, Yes, I am using a SignaLink USB with their cable & with my K3 and Mac. I will send you separately a write-up on my connections and settings. 73, Hoop

I agree even though I have a Signalink and have used it with my K3.

I don't see the need for it. K3 is already buffered and with easy PTT and adjustable Lin IN and Lin OUT all I need is two stereo cables. Works great. YMMV ...bill nr4c

Yes, Steve I have been using the rear interface cables for a couple of years now. They are clearly marked so they are easy to install and I have had no issues or problems. The other advantage is

Yes I use the SignaLink USB connected to the line in/line out jacks on the back of the K3. Be sure to set the jumper for line level output inside the SignaLink unit. 73, David W4DES K3 #7409

Is anyone using a SignaLink USB interface & K3 through the jacks on the back of the K3? I ordered the interface unit yesterday. Steve K6SAB K3 / 7497