Sometimes it takes some current demand before an ailingfilter cap is noticed. Rich, n0ce

Anyone using the Signalink with their K3? What are you settings for the transmit on the signalink, power on k3, line-in setting (mic), etc. I'm not sure mine is working right on transmit. Do you

Thanks to the help of Cliff, VK2CC, I got the problem corrected. In the WSPR setup, under handshake I had "Hardware" selected, by changing to "None", the WSPR program now changes freqs on my K3,

Good day. Reason might be humidity in your case 73 OZ1AAR, Villy 2013/1/17 Bill Maddock <n4zi96@...> -- Vy 73 de OZ1AAR, Villy

That's a relief, well sorta. 73 Mike R Play me some fiddle, but no stinkin' violin! Amateur/Ham Radio KE5GBC HF & Echolink mobile

Hello Jim Two suggestions :- You might have some RF feedback which isgetting into your rig. See if it happens on all bands or not, and see what happenson a dummy load (if you can monitor using

Fortunately the K3 100W amplifier was not at fault. The problem was caused by noise from a hefty 40 amp linear PSU which had given impeccable service for several years. Jim G3KAF

When I bought my first K3 no sub-receiver I still had an SDR-IQ and tried using it with the K3, had used it with the FT-5000 I had before. It worked OK but when I ordered my second K3 I knew that I

Whoops. That should read ANAN-10.

Someone has mentioned the ANAN-100 SDR. Has anyonein this group purchased one yet? If so, would you care to commentplease? I have read eHam reviews, but I'd like to hear fromsomeone in this group.

Paul, Shut down HRD when you are WSPRing. If WSPR needsthe serial port, it is not going to work right if any other program is trying tocontrol your K3. If you find that you simply MUST have

What does that tell you about your amp? Dave W7AQK

Absolutely correct! Mark. N2QT

SDR-14 and Perseus are not even in the same league. Perseus is spec'd for > 100dB dynamic range vs. 90 for the SDR-14. Perseus is an 80Ms/s vs. 66 MS/s for the SDR-14. Perseus has a 30 dBm 3rd

Hi George, Man, I just *hate* it when someone beats me to a good idea! :) matt W6NIA To: Elecraft_K3@... From: georgefritkin@... Date: Wed, 16 Jan 2013 12:47:22 -0800 Subject: Re: [Elecraft_K3]

Gentlemen, I still have one K3 bug that needs to be resolved! It appears that my K3’s are sensitive to temperature specifically “Cold” temps. It appears to be an issue with the final

 Fact is fact. The K3 is dated. Superhetrodyne with low frequencydigital processing. Also, fact is the market is notdemanding more, of course with $ to back up the demand. After the first

Gentlemen, I still have one K3 bug that needs to be resolved! It appears that my K3’s are sensitive to temperature specifically “Cold” temps. It appears to be an issue with the final

I use an RF-Space SDR-14 in conjunction with my K3, the SpectraVue software supports the K3 and I can have 3 receivers. The SDR-14 locks on the K3's 8.215 MHz I.F. and the spectrum/waterfall tracks

I use an RF-Space SDR-14 in conjunction with my K3, the SpectraVue software supports the K3 and I can have 3 receivers. The SDR-14 locks on the K3's 8.215 MHz I.F. and the spectrum/waterfall tracks