Date   

Switching between SSB and Data

w0rw
 

Is there an easy shortcut i can use to switch between SSB and Data ?
i have a K3s with the MH2 microphone..
Does the Frequency Memory Editor have the capability to make those changes?
Maybe the rear panel Mic connector?
Right now i have to turn the VOX off for SSB go to Menu, find Mic Select, turn to F.Pl Bias...
etc.
Then going back to Data i have to tune the VOX on, go to the menu,   etc etc.
Thanks
Paul   w0rw


Elecraft XG2 For Sale

Irwin Darack
 

I have an Elecraft XG2 Signal Generator for Sale .

This is a used Elecraft's XG2 3-Band Test Oscillator Signal Generator. The XG2 uses a crystal oscillator and is ideal for receiver testing, alignment and S-Meter calibration.

* RF Output Level: 1 µV (-107 dBm) and 50 µV (-73 dBm = S9)
  *Output Accuracy: Typically Better than +/-2 dB at 25 deg. C
* Frequencies: 3.579.5, 7.040 and 14.060 MHz
* Switch selectable output
* Uses a CR2032 Lithium Battery
* Red LED Light used to indicate power on
* Instruction manual included

Asking $70.(or reasonable offer) + Shipping - Con USA Only.

Please contact me off the reflector: idarack(at) gmail.com

Thanks, Irwin KD3TB




KAT500 Tune Keying

K9MA
 

Does anyone know how to get the KAT500 to automatically put the K3 in the "Tune" mode (RF out) when the button on the KAT500 is pressed? I remember having this problem with the KPA1500, but fixed it somehow.


73,

Scott K9MA

-- 
Scott  K9MA

k9ma@...


Re: CW from keyboard?

Peder Kittelson W7RPK
 

One more thing.  You need to start the transmitting first by clicking on the transmit button.  Then it will keep transmitting until you click on it to stop.  So at that point you can transmit anything and anything until you click the stop button.

On Sat, Dec 5, 2020 at 10:10 AM Peder Kittelson via groups.io <peder.kittelson=gmail.com@groups.io> wrote:
Make sure that you have not done ANY work in the programming tab area before you attempt to transmit continuously.  I finally figured out that if I want to simply transmit in the terminal area I should restart the program and go directly to the terminal area and transmit there.  It works.

On Wed, Dec 2, 2020 at 10:47 PM ke9uw <c-hawley@...> wrote:
I can type into the P3 transmit window from the keyboard, do ctrl T and transmit what I have typed. But, with VOX turned on, I type and it still fills the transmit window and won't transmit until I hit ctrl T. What am I needing to do to transmit while typing?


Re: CW from keyboard?

Peder Kittelson W7RPK
 

Make sure that you have not done ANY work in the programming tab area before you attempt to transmit continuously.  I finally figured out that if I want to simply transmit in the terminal area I should restart the program and go directly to the terminal area and transmit there.  It works.

On Wed, Dec 2, 2020 at 10:47 PM ke9uw <c-hawley@...> wrote:
I can type into the P3 transmit window from the keyboard, do ctrl T and transmit what I have typed. But, with VOX turned on, I type and it still fills the transmit window and won't transmit until I hit ctrl T. What am I needing to do to transmit while typing?


Re: Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

Mel Marcus
 

RAY

This is the part number and description: KSYN3A Upgrade Kit 
Remember if you have a sub receiver you will need two of these

Mel
NE9A

-------- Original Message --------
Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an
“S Module” for a K3 #forsale
From: "Ray Maxfield" <wa6vab@...>
Date: Thu, December 03, 2020 12:38 pm
To: "Elecraft-K3@groups.io" <Elecraft-K3@groups.io>

Is the New Synthesizer available ? 
P/N ?
$$ ?    thanks  ray WA6VAB  K3
 
From: Dave Cole
Sent: Thursday, December 3, 2020 5:00 AM
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale
 
Hi Mel,
 
Is the updated, new synth, for the K3 closer to the one in the K3S, or
is it the same?
 
I know adding the new synth to my K3 made a big difference...
 
See:
 
 
I did some screen shots of the P3, showing my neighbor 700 feet away,
running 100 watts as we both went from the old to the new synths in the
following steps:
 
1.  Both old synth.
2.  New Synth in distant rig.
3.  New synth in my rig.
 
The differences are clearly visible...
 
73, and thanks,
Dave (NK7Z)
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
 
On 12/2/20 8:22 PM, Mel Marcus wrote:
> Dave
>
> What he is talking about is the synthesizer . that is the big difference
> between the k3 and the k3s. if you have a subreceiver , you would need two
>
> Mel
> NE9A
>
>     -------- Original Message --------
>     Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an
>     “S Module” for a K3 #forsale
>     From: "David Bunte" <dpbunte@... <mailto:dpbunte@...>>
>     Date: Wed, December 02, 2020 8:02 pm
>
>     Larry -
>
>     I can’t help you but am curious. What do you mean be “...a K3S
>     module for K-3.”
>
>     I have never heard of such a thing.
>
>     Dave - K9FN
>
>     On Wed, Dec 2, 2020 at 8:06 PM Proberbs356 via groups.io
>     <http://groups.io> <Proberbs356@...
>     <mailto:me.com@groups.io>> wrote:
>
>
>         --
>         Hello, I’m looking for a K3S module for K-3. must be in great
>         shape and working.
>
>         please let me know what you have and the price you’d like to get
>         for it. You can reach me by email at: proberbs356@...
>         <mailto:proberbs356@...>
>
>         Thank you so much!
>
>         Larry Deyoe
>         K7HN
>
>
 
 
 
 
 


Re: Looking for a. Pair of KSYN3A boards for a K3

David Box
 

Larry

You should go to <https://elecraft.com/pages/k3-k3s-options-interest-form> and let them know you are interested.

Elecraft is trying to get a list of what people still need for the K3/K3s and are asking you to fill out the form.  When there is sufficient interest on a given item they will then do a production run. 

Finding a KSYN3A on the used market is going to be extremely unlikely.

Gud Luck

de Dave K5MWR


On 12/3/2020 14:18, Proberbs356 via groups.io wrote:


Sorry for the re-post but I want to to be specific here

I’m looking for a pair of KSYN3A boards for a K-3. must be in great shape and working. 

Please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...

Thank you so much!

Larry Deyoe
K7HN
YouTube: Ham Radio Live!


Looking for a. Pair of KSYN3A boards for a K3

Proberbs356@...
 


Sorry for the re-post but I want to to be specific here

I’m looking for a pair of KSYN3A boards for a K-3. must be in great shape and working. 

Please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...

Thank you so much!

Larry Deyoe
K7HN
YouTube: Ham Radio Live!


Re: Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

Ray Maxfield
 

Is the New Synthesizer available ? 

P/N ?

$$ ?    thanks  ray WA6VAB  K3

 

From: Dave Cole
Sent: Thursday, December 3, 2020 5:00 AM
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

 

Hi Mel,

 

Is the updated, new synth, for the K3 closer to the one in the K3S, or

is it the same?

 

I know adding the new synth to my K3 made a big difference...

 

See:

 

https://www.nk7z.net/k3/

 

I did some screen shots of the P3, showing my neighbor 700 feet away,

running 100 watts as we both went from the old to the new synths in the

following steps:

 

1.  Both old synth.

2.  New Synth in distant rig.

3.  New synth in my rig.

 

The differences are clearly visible...

 

73, and thanks,

Dave (NK7Z)

https://www.nk7z.net

ARRL Volunteer Examiner

ARRL Technical Specialist, RFI

ARRL Asst. Director, NW Division, Technical Resources

 

On 12/2/20 8:22 PM, Mel Marcus wrote:

> Dave

>

> What he is talking about is the synthesizer . that is the big difference

> between the k3 and the k3s. if you have a subreceiver , you would need two

>

> Mel

> NE9A

>

>     -------- Original Message --------

>     Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an

>     “S Module” for a K3 #forsale

>     From: "David Bunte" <dpbunte@... <mailto:dpbunte@...>>

>     Date: Wed, December 02, 2020 8:02 pm

>     To: Elecraft-K3@groups.io <mailto:Elecraft-K3@groups.io>

>

>     Larry -

>

>     I can’t help you but am curious. What do you mean be “...a K3S

>     module for K-3.”

>

>     I have never heard of such a thing.

>

>     Dave - K9FN

>

>     On Wed, Dec 2, 2020 at 8:06 PM Proberbs356 via groups.io

>     <http://groups.io> <Proberbs356@...

>     <mailto:me.com@groups.io>> wrote:

>

>

>         --

>         Hello, I’m looking for a K3S module for K-3. must be in great

>         shape and working.

>

>         please let me know what you have and the price you’d like to get

>         for it. You can reach me by email at: proberbs356@...

>         <mailto:proberbs356@...>

>

>         Thank you so much!

>

>         Larry Deyoe

>         K7HN

>

>

 

 

 

 

 


P3 Power Sensor data spurs on 160M

Stewart G3RXQ
 

Having spent some time chasing groups of S6/7 carriers spaced at ~2.5kHz on 160M.
I have traced them to data signals from the P3 being injected into the DCHF-2000 coupler.

To check that this was the case, and that no other pick-up mechanism was involved I connected
the coupler to my K3 with a dummy load directly on its output. Removing the data link to the P3
removes the spurs.

Anyone else experienced this and found the solution ?

73 Stewart G3RXQ / G3Q


Re: Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

Dave (NK7Z)
 

Hi Mel,

Is the updated, new synth, for the K3 closer to the one in the K3S, or is it the same?

I know adding the new synth to my K3 made a big difference...

See:

https://www.nk7z.net/k3/

I did some screen shots of the P3, showing my neighbor 700 feet away, running 100 watts as we both went from the old to the new synths in the following steps:

1. Both old synth.
2. New Synth in distant rig.
3. New synth in my rig.

The differences are clearly visible...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 12/2/20 8:22 PM, Mel Marcus wrote:
Dave
What he is talking about is the synthesizer . that is the big difference between the k3 and the k3s. if you have a subreceiver , you would need two
Mel
NE9A
-------- Original Message --------
Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an
“S Module” for a K3 #forsale
From: "David Bunte" <dpbunte@gmail.com <mailto:dpbunte@gmail.com>>
Date: Wed, December 02, 2020 8:02 pm
To: Elecraft-K3@groups.io <mailto:Elecraft-K3@groups.io>
Larry -
I can’t help you but am curious. What do you mean be “...a K3S
module for K-3.”
I have never heard of such a thing.
Dave - K9FN
On Wed, Dec 2, 2020 at 8:06 PM Proberbs356 via groups.io
<http://groups.io> <Proberbs356=me.com@groups.io
<mailto:me.com@groups.io>> wrote:
--
Hello, I’m looking for a K3S module for K-3. must be in great
shape and working.
please let me know what you have and the price you’d like to get
for it. You can reach me by email at: proberbs356@me.com
<mailto:proberbs356@me.com>
Thank you so much!
Larry Deyoe
K7HN


CW from keyboard?

ke9uw
 

I can type into the P3 transmit window from the keyboard, do ctrl T and transmit what I have typed. But, with VOX turned on, I type and it still fills the transmit window and won't transmit until I hit ctrl T. What am I needing to do to transmit while typing?


Re: Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

Mel Marcus
 

Dave

What he is talking about is the synthesizer . that is the big difference between the k3 and the k3s. if you have a subreceiver , you would need two

Mel
NE9A

-------- Original Message --------
Subject: Re: [Elecraft-K3] Looking for K3/0 “mini” as well as an
“S Module” for a K3 #forsale
From: "David Bunte" <dpbunte@...>
Date: Wed, December 02, 2020 8:02 pm
To: Elecraft-K3@groups.io

Larry -

I can’t help you but am curious. What do you mean be “...a K3S module for K-3.”

I have never heard of such a thing. 

Dave - K9FN 

On Wed, Dec 2, 2020 at 8:06 PM Proberbs356 via groups.io <Proberbs356=me.com@groups.io> wrote:

--
Hello, I’m looking for a K3S module for K-3. must be in great shape and working. 

please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...

Thank you so much!

Larry Deyoe
K7HN


K3 Synth boards needed for K3 #forsale

Proberbs356@...
 


--
Hello, I’m looking for a couple of working “synthesizer modules” for a K3. 


Please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...


Thank you so much!

Larry Deyoe
K7HN


Re: Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

David Bunte
 

Larry -

I can’t help you but am curious. What do you mean be “...a K3S module for K-3.”

I have never heard of such a thing. 

Dave - K9FN 

On Wed, Dec 2, 2020 at 8:06 PM Proberbs356 via groups.io <Proberbs356=me.com@groups.io> wrote:

--
Hello, I’m looking for a K3S module for K-3. must be in great shape and working. 


please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...

Thank you so much!

Larry Deyoe
K7HN


Looking for K3/0 “mini” as well as an “S Module” for a K3 #forsale

Proberbs356@...
 


--
Hello, I’m looking for a K3S module for K-3. must be in great shape and working. 


please let me know what you have and the price you’d like to get for it. You can reach me by email at: proberbs356@...

Thank you so much!

Larry Deyoe
K7HN


I'm looking for K3/0 or K3/0-Mini

Robin
 

Looking for a K3/0 or K3/0-Mini in good condition.
Feel free to send an email and tell me what you have and what you would like for it.

73
SA2RJO


Elecraft K3s for Sale

Irwin Darack
 

I am selling my Elecraft K3s and will post here before placing on Ebay.

Elecraft K3s - this radio was built by kit and is in excellent condition. 
  • Serial # 10354
  • 100W Upgrade
  • Filters are: 2.7kHz, 2.1 kHz & 400 Hz.
  • Digital Voice Recorder
  • ATU - Antenna Tuner
  • Kit Manual & Owners Manual
  • Power Cord
I am also including the following books.
Fred Cady's ' The Elecraft K3s and P3 Manual'
Fred Cady's 'Elecraft Macro Programming Manual'

I am asking $2,500 (or best reasonable offer) with Free Shipping to Continental US. Pick up or  local delivery from Doylestown, PA (-$100).

If interested, please contact me off reflector.
--
Irwin KD3TB


Re: K3 Inventory Software ???

Randy Hall <listk7age@...>
 

Thanks all
Randy

On Sun, Nov 29, 2020 at 9:44 AM Dave Cole <dave@...> wrote:
Many thanks for that link!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 11/29/20 7:17 AM, Bill Mader wrote:
> K3_EZ will do this:
>
> http://elecraft.365791.n2.nabble.com/K3-EZ-Program-td7568658.html
>
> The author is a silent key so it's no longer supported.  I use it
> frequently for various reasons.
>
> 73, Bill, K8TE
>






Re: Elecraft K3/0 (Original) and Remote Rig interface units for sale #forsale #k3/0 #forsale #remoterig

Mel Marcus
 

How much are you asking?

-------- Original Message --------
Subject: Re: [Elecraft-K3] Elecraft K3/0 (Original) and Remote Rig
interface units for sale #forsale #k3/0 #remoterig
From: "Svante Nordenstroem" <sm3dyu@...>
Date: Tue, December 01, 2020 1:28 am
To: Elecraft-K3@groups.io

On 2020-12-01 01:32, George Zafiropoulos wrote:
I have a beautiful Elecraft K3/0 remote unit and Remote Rig units for sale.
These were purchased several years ago, put in a box, and never used.  They are in pretty much new condition.
I have no need for them and would like to sell them.
This is the original K0 in the same chassis box as the K3, not the K0 Mini. 
The Remote Rig devices come with the Elecraft cable set.  
Everything should be working fine but I have not tested any of it.
Does anyone know what these things should be going for these days?
73
George
Hi
Interested, what are you asking for it? I can do shipping to Maryland, if the price is acceptable.
73
Sam
HS0ZDY
Bangkok

2281 - 2300 of 36295