Date   

Re: [Elecraft_K3] Rumors

mikerodgerske5gbc
 

Look for it in 2077. 

73
Mike R

7!
Absolutely Awesome 

On Feb 2, 2017, at 10:54 PM, 'Reg Boudinot' reg@... [Elecraft_K3] <Elecraft_K3@...> wrote:

 

Wayne:

 

Cute, without disclosing anything.  We await the K4 SDR.

 

J

 

Reg K3s owner

 

 

From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: Thursday, February 02, 2017 10:51 PM
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Rumors

 

 


>
> Any rumors about a new Elecraft Radio?
>

Not.

Yet, as ever, your humble engineering team persists with monk-like devotion in keeping your existing Elecraft radios updated.

Wayne
N6KR


Re: [Elecraft_K3] Rumors

Richard Smith
 

My vote for KPA1000 or KPA1500 at same price point.


Re: [Elecraft_K3] Rumors

Mark Bayern
 

This is the beginning of February. Isn't it a little too early to
start the rumors about new products intros at Hamvention?

Mark


Re: [Elecraft_K3] Rumors

dalej <dj2001x@...>
 

Yes, KPA1500 and a K4SDR with narrow auto notch inside the AGC loop, make it with 4 slice receivers and a 200 watt transmitter, built in spectrum analyzer, hot pancakes with maple syrup, etc.

Dale K9vuj


On 03, Feb 2017, at 6:54, 'ab4iqkf4cxo' ab4iq@... [Elecraft_K3] <Elecraft_K3@...> wrote:



I have two K3S’s and just waiting for the KPA1500.
 
From: Elecraft_K3@... [mailto:Elecraft_K3@...] 
Sent: Thursday, February 2, 2017 9:40 PM
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Rumors
 
  
John,
 
It is a safe bet that Wayne, Eric and all the wonderful people in the backroom of Elecraft are working on something new and wonderful.... That said with was less then 50 people working for the whole company and hundreds of K3S, P3, KPA500, KAT500, KX2, KX3, PX3, KXPA100, and all the other goodies going out each month, it will be a few years until the next generation is done... Besides, once they do have something the test and re-test the design and refine it, and that takes time also.
 
I have two used K3's, as well as K-Line and a KX2, KX3 and PX3, that these radio will not be outdated and will do more then you will ever expect... The best part is, once you buy the radio, you get a customer service department that really cares and will do pretty much whatever it takes to keep you happy.... So get the K3S and when you can get the P3... 

 
Have fun
 
73 Harry  K7ZOV
 

From: "john_n1jm@... [Elecraft_K3]"
To: Elecraft_K3@... 
Sent: Thursday, February 2, 2017 8:21 PM
Subject: Re: [Elecraft_K3] Rumors
 
  
Good then I will go buy a new K3s.
 
73, John N1JM
 







Re: [Elecraft_K3] Rumors

dalej <dj2001x@...>
 

And inside the AGC loop :)

Dale J.

Does this mean the K3 auto notch width can be narrowed to match that of
the manual notch? I rarely if ever use the auto notch preferring the
manual notch instead.

73, Nate, N0NB


Re: [Elecraft_K3] Rumors

Charlie T, k3ICH
 

Latest rumor is that Wayne broke a string on his guitar and replaced it with the wrong size.   

Within a few minutes,  he discovered the “Lost Chord” * that has been hidden and sought after by various instrument artists for eons.

This will surely revolutionize the entire music industry.

Due to the notoriety this generated, Wayne has become a recluse and will only eat celery and drink distilled water.

 

 

I expect no less than thousands of replies and will probably be banned from ever posting on the Elecraft forum again.

 

Charlie k3ICH

 

 

*This chord was supposedly used in the composition of  Stravinsky’s “The Rite Of Spring” but not verified,  and several Beatles songs.  The chord itself can only be heard when played backwards at high speed.

 

 

From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: Thursday, February 02, 2017 11:51 PM
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Rumors

 

 


>
> Any rumors about a new Elecraft Radio?
>

Not.

Yet, as ever, your humble engineering team persists with monk-like devotion in keeping your existing Elecraft radios updated.

Wayne
N6KR


Re: [Elecraft_K3] Rumors

Ed Pflueger
 

I have two K3S’s and just waiting for the KPA1500.

 

From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: Thursday, February 2, 2017 9:40 PM
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Rumors

 

 

John,

 

It is a safe bet that Wayne, Eric and all the wonderful people in the backroom of Elecraft are working on something new and wonderful.... That said with was less then 50 people working for the whole company and hundreds of K3S, P3, KPA500, KAT500, KX2, KX3, PX3, KXPA100, and all the other goodies going out each month, it will be a few years until the next generation is done... Besides, once they do have something the test and re-test the design and refine it, and that takes time also.

 

I have two used K3's, as well as K-Line and a KX2, KX3 and PX3, that these radio will not be outdated and will do more then you will ever expect... The best part is, once you buy the radio, you get a customer service department that really cares and will do pretty much whatever it takes to keep you happy.... So get the K3S and when you can get the P3...

 

Have fun

 

73 Harry  K7ZOV

 


From: "john_n1jm@... [Elecraft_K3]"
To: Elecraft_K3@...
Sent: Thursday, February 2, 2017 8:21 PM
Subject: Re: [Elecraft_K3] Rumors

 

 

Good then I will go buy a new K3s.

 

73, John N1JM

 


Re: [Elecraft_K3] Rumors

Ludovic Ludo
 

Le 03/02/2017 à 03:20, Carl Jón Denbow denbow44@... [Elecraft_K3] a écrit :
I can start one: totally SDR, a rival for the Icom 7300 and the Flex 6500
It exist... It is the K3S the rival of Flex6500 and of course of IC7300...

ADC do not resist at strong sigs like you can see for example on
http://radioamateur.forumsactifs.com/t1042-elecraft-kx3#2051 (KX3)
or
http://radioamateur.forumsactifs.com/t1042-elecraft-kx3#2051 (ANAN100)

Best regards,
Ludovic - F5PBG.


Re: [Elecraft_K3] Rumors

 

* On 2017 02 Feb 22:51 -0600, Wayne Burdick n6kr@elecraft.com [Elecraft_K3] wrote:


Any rumors about a new Elecraft Radio?

Not.

Yet, as ever, your humble engineering team persists with monk-like
devotion in keeping your existing Elecraft radios updated.
Does this mean the K3 auto notch width can be narrowed to match that of
the manual notch? I rarely if ever use the auto notch preferring the
manual notch instead.

73, Nate, N0NB

--

"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us


Re: [Elecraft_K3] Rumors

Reg AA5GI
 

Wayne:

 

Cute, without disclosing anything.  We await the K4 SDR.

 

J

 

Reg K3s owner

 

 

From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: Thursday, February 02, 2017 10:51 PM
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Rumors

 

 


>
> Any rumors about a new Elecraft Radio?
>

Not.

Yet, as ever, your humble engineering team persists with monk-like devotion in keeping your existing Elecraft radios updated.

Wayne
N6KR


Re: [Elecraft_K3] Rumors

 


Any rumors about a new Elecraft Radio?

Not.

Yet, as ever, your humble engineering team persists with monk-like devotion in keeping your existing Elecraft radios updated.

Wayne
N6KR


Re: [Elecraft_K3] Rumors

harry latterman <harrylatterman@...>
 

John,

It is a safe bet that Wayne, Eric and all the wonderful people in the backroom of Elecraft are working on something new and wonderful.... That said with was less then 50 people working for the whole company and hundreds of K3S, P3, KPA500, KAT500, KX2, KX3, PX3, KXPA100, and all the other goodies going out each month, it will be a few years until the next generation is done... Besides, once they do have something the test and re-test the design and refine it, and that takes time also.

I have two used K3's, as well as K-Line and a KX2, KX3 and PX3, that these radio will not be outdated and will do more then you will ever expect... The best part is, once you buy the radio, you get a customer service department that really cares and will do pretty much whatever it takes to keep you happy.... So get the K3S and when you can get the P3...

Have fun

73 Harry  K7ZOV



From: "john_n1jm@... [Elecraft_K3]"
To: Elecraft_K3@...
Sent: Thursday, February 2, 2017 8:21 PM
Subject: Re: [Elecraft_K3] Rumors

 
Good then I will go buy a new K3s.

73, John N1JM



Re: [Elecraft_K3] Rumors

john_n1jm@...
 

Good then I will go buy a new K3s.

73, John N1JM


Re: [Elecraft_K3] Rumors

Carl Denbow
 

I can start one: totally SDR, a rival for the Icom 7300 and the Flex 6500.  Use SmaterSDR software.  ;-)

============================

Carl Jón Denbow

P.O. Box 5714

Athens, Ohio 45701-5714


(740) 591-8471

============================


On Feb 2, 2017, at 8:51 PM, john_n1jm@... [Elecraft_K3] <Elecraft_K3@...> wrote:

 

Any rumors about a new Elecraft Radio?


Re: [Elecraft_K3] Rumors

w7aqk
 

Not that I know of, but you may have started one!!!!  Hi.
 
Dave W7AQK
 
 
 

From: john_n1jm@... [Elecraft_K3]
Sent: Thursday, February 2, 2017 6:51 PM
To: Elecraft_K3@...
Subject: [Elecraft_K3] Rumors
 
 

Any rumors about a new Elecraft Radio?


Rumors

john_n1jm@...
 

Any rumors about a new Elecraft Radio?


Re: Today's Video: You've Got a Friend In Me by 4-year-old Claire Ryann and Dad

hickspj467@...
 

I find no Elecraft related info in the links.... BUT I did fine inspiration and hope while watching a father and his 4 y/o daughter sing together. That, of course, led to many other Claire Ryann vids. That is a very special time for little girls and their relationships with their dads. So very special.
Thank you for the links and the 'good vibs', now back to radio.

PJH, N7PXY


Re: K3 Receiver - spurious responses

Steve
 

Let the group know what you find out.  I have a signal on 28.134 also.


Today's Video: You've Got a Friend In Me by 4-year-old Claire Ryann and Dad

William DeLoach
 

 

 

 

      This is so cute, a must see!!!!!!!                                                                                            Today's Video: You've Got a Friend In Me by 4-year-old Claire Ryann and Dad

 

 

 

 







You got troubles, I do to, there isn't anything I wouldn't do for you.... As soon as I saw Claire and her Dad on TV last night I knew I had to find this heart warming video and share it with you today. I hope you enjoy their performance as much as I did.

If you like today's video please share it with your family and friends.
Click Below !
You've Got a Friend In Me by 4-year-old Claire Ryann and Dad 

 







 

 





Re: Hi-Z Receive System & K3

rlc@...
 

Use either the Front End Saver sold by DXE or their Receiver Guard. I use both (on different rigs) and they work well!

73

Bob AA6VB

8381 - 8400 of 36029