Re: Relay K11


ve3ki
 

IIRC, to change between the two input choices (ANT = ATU or ANT = BNC), you also need to move a TMP cable inside the rig. If the choice you make in the K3's CONFIG does not match where the cable has been connected, the subRX won't hear anything.

73,
Rich VE3KI


On Sun, Oct 10, 2021 at 06:11 PM, @SM6CGI wrote:
Hi Chet,

"If I do a long press on the RX button to toggle the sub antenna, the sub display shows “Main” but I get no signal to the sub from it."

As you describe, this is how my KRX3 on my K3 works. On my K3, there is no AUX RF (BNC), only ANT1 and ANT2.


73 / SM6CGI / Lars

Join Elecraft-K3@groups.io to automatically receive all group messages.