Re: Relay K11 KRX3 Sub-in board

Chet, N8RA

Thank you for these hints Keith.

Everything else is working FB but I think I will wait until my ordered kxv3b module arrives, since then I’ll have to take apart that whole area and can inspect closely.


Chet, N8RA



From: <> On Behalf Of Keith_WE6R
Sent: Sunday, October 10, 2021 11:24 AM
Subject: Re: [Elecraft-K3] Relay K11 KRX3 Sub-in board


Hi Chet;
It is more likely a problem on the Sub-in board, like some or all of the 5 pins missed the socket, or the little board is plugged in to the RF board wrong.
Also, there is a little black choke on that little board that gets knocked off.
It could be the 3db splitter transformer too, look closely at the legs, the wires break or the solder did not melt the enamel. 
Take the handle side panel off and inspect.
Keith WE6R Elecraft K3/K4 Tech

Join to automatically receive all group messages.