Re: K3 SSB not transmitting, CW & DATA transmit


Glen Johnsen
 

Thank you for responding Mel

Power levels are saved.  I tried varying the level from 5 to 50 watts and no response

Microphone is Heil Pro 20 and I checked the cable for continuity, bent pins, and connectors mated.  Front panel mount.

 

Regards

Glen KA6GMA

 

 

From: Elecraft-K3@groups.io <Elecraft-K3@groups.io> On Behalf Of Mel Marcus
Sent: Monday, September 20, 2021 7:36 AM
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] K3 SSB not transmitting, CW & DATA transmit

 

just a thought. are power levels saved by mode and band. if they are, what is the power level set at for SSB on the band you are trying to operate.

 

Mel

NE9A


From: Elecraft-K3@groups.io <Elecraft-K3@groups.io> on behalf of Glen Johnsen via groups.io <ka6gma@...>
Sent: Monday, September 20, 2021 9:09 AM
To: Elecraft-K3@groups.io <Elecraft-K3@groups.io>
Subject: [Elecraft-K3] K3 SSB not transmitting, CW & DATA transmit

 

GM from KA6GMA, Glen

I am having issue with no power output using SSB

Although, CW and DATA are working just fine

MiC Gain is 30

Did reset on K3 still no response on SSB

Any suggestions to try?

 

Regards,

Glen KA6GMA

 

Join Elecraft-K3@groups.io to automatically receive all group messages.