Re: K3/0-mini Schematic


Henk PA0C
 

Hi Dan,

 

I figured out part of the connector, only what I needed.

 

With the AUX/RJ45 connector towards you:

At the 9 pin “IC-connector”, the row towards the middle of the pcb, counting from left to right

 

2 mic ground

3 ground

4 mic input

5 ptt input

 

Hope this helps a bit

 

73 Henk

PA0C

 

 

 

Van: Elecraft-K3@groups.io <Elecraft-K3@groups.io> Namens Dan K4FN
Verzonden: woensdag 24 maart 2021 00:59
Aan: Elecraft-K3@groups.io
Onderwerp: Re: [Elecraft-K3] K3/0-mini Schematic

 

[Edited Message Follows]

Mark,
That works for all except the AUX/MIC RJ45 connector which depends on the jumper settings in the RRC.  I having trouble tracing them back.
Dan  K4FN

Join Elecraft-K3@groups.io to automatically receive all group messages.