Re: K3s not communicating with computer

Ed Pflueger

My baud rate is 38400.


Ed.. AB4IQ


From: [] On Behalf Of Rick NK7I
Sent: Saturday, July 11, 2020 3:21 PM
Subject: Re: [Elecraft-K3] K3s not communicating with computer


Try at 19200 (or other speeds).  If I recall correctly, you can 'talk' to the P3 at whatever speed you wish, but it talks to the K3 at 19200 only.

On the other hand if you're not serial connecting the P3 to the K3, the baud rate is in the K3 menu.

GL de Rick NK7I


On 7/10/2020 7:48 PM, Henry Jarzyna wrote:

For the first time after acquiring the previously owned K3s I connected the radio via the USB to the computer. The P3 is also connected via CBLP3Y to the radio. Baud is set at 38400. The K3s is not connecting with the computer and Elecraft Utility. When I disconnect the RJ45 from the radio, communication is complete and I can install updated firmware and I can use N1MM+ logger for the upcoming contest. I do not have the E980297 cable I can use for the second option. I would like to retain the complete functions of the P3. The RS232/P3 and USB ports can not be active at the same time?
Am I missing something? 73
Henry VA3OV

Join to automatically receive all group messages.