Re: K3 supply voltages


Alan Baker
 

If you're having problems with Anderson Powerpoles, then they've been incorrectly fitted, or are fakes.

They do NOT need soldering, unless it's to a PCB. Crimping is actually more reliable than soldering, provided that the approved crimp tool is used.

Elecraft use the correct tools to fit Powerpoles to cables that they supply. Others may not.

All of the issues I've ever seen with Powerpoles is either badly fitted crimps (usually a cheap crimp tool used), the wrong tab for the cable and shell, or counterfeit powerpoles.

73,

Alan. G4GNX


------ Original Message ------
From: "Bruce Prior" <n7rr@...>
Sent: 27/04/2020 17:46:20
Subject: Re: [Elecraft-K3] K3 supply voltages

My problem is the finicky Anderson Powerpole connectors, which are far too loose. I commented about the problem in my QST review of the K3 in the April 2008 issue. See page 45 of my otherwise stellar review.
73,
Bruce Prior N7RR
_.

Join Elecraft-K3@groups.io to automatically receive all group messages.