Re: K3/KPA500 issue


Bart Campbell
 

Gerry,

I had the exact same problem except on 17 meters.  Performing a transmitter gain calibration with the K3 utility solved the problem.

73,
Bart, NS4X



On Sat, Apr 25, 2020 at 4:25 PM Gerry Villhauer <w0gv@...> wrote:
I usually operate CW. When I go to SSB on 75 meters with the KPA500 on, the amp will not put our power; unless I do the following: Go to CW mode and key up for only a second. Go back to SSB mode and I get power. Any suggestions or comments appreciated.

Gerry, W0GV

Join Elecraft-K3@groups.io to automatically receive all group messages.