Re: K3S and WSJT-X on 160M


Carl Moreschi
 

Another solution that keeps CAT completely working is to use OmniRig in WSJT-X and connect that to my N4PY Pegasus Plus. That solves everything. And you can still use CAT PTT.

Carl Moreschi N4PY
127 River Moss Way
Hertford, NC 27944
www.n4py.com

On 4/15/2020 10:56 AM, Bob McGraw - K4TAX wrote:
Here is the solution. Thanks to Bill Sommerville of the WSJT-X
support group. The K3 response may be different than that of the K3S.
Using USB communication between the radio and computer.

<snip>
Bob,

Although running this sort of split will work on some rigs using CAT
control, by selecting "Settings->Radio->Split Operating->None", it is
not officially supported.

If it doesn't work for your rig then you can disable CAT control and set
the rig's VFOs and SPLIT manually by selecting
"Settings->Radio->Rig->None". This clearly cannot be used with CAT PTT
commands but if your rig supports PTT via RTS use that, or VOX (or DATA
VOX) on the rig.

You can make a separate configuration in WSJT-X to support this
including the Rx frequency for logging.

73
Bill
G4WJS
<snip>

Thanks Bill for the info and solution.

73
Bob, K4TAX



Join Elecraft-K3@groups.io to automatically receive all group messages.