toggle quoted messageShow quoted text
I meant software patch not mod. My impression was that the program
open the K3 up to become
a general coverage transceiver. This being said, the
7.600 to 7.700 Mhz range is real cloe to the IF
frequency so this range may be blocked. I would ask the
Elecraft Tech Support folks about this.
On 2020-04-09 8:26 PM, Mel Marcus
Thanks for you reply. Are you sure there is a MARS mod for
the K3. At one time when I asked about it, they said that the
is a program to run that opens the unit up. I have that
program and executed and ran the test enclose in that program
suscessful. but please update me to if there is really a MARS
-------- Original Message --------
Subject: Re: [Elecraft-K3] Out Band
From: "Milt" <marleny@...
Date: Thu, April 09, 2020 4:16 pm
And NITA is not going to be happy if he does.
Me thinks the decimal was missed and
thus the frequencies of operation needed is
7.600 to 7.700 Mhz range. For this the MARS MOD is needed.
On 2020-04-09 4:12 PM, Charlie
T, k3ICH wrote:
you’ll need an outboard microwave transverter to
operate on 7.6 to 7.7 GHz.
have operated the k3 band limits program and haves
have a legal need to operate in the 7600 to 7700
Mhz range. When I dial or insert the frequency ,
and then hit xmit or tune, it tell me out of
band. Is there a way that I can operate the k3 in
the above freq range.