Re: RPI to K3 serial connection

Bill Maddock

In the menu it will need to be USB

On Thursday, April 9, 2020, 3:47 AM, Ron Croucher <vk4cro@...> wrote:

I have mine going onwjstx-2 I use rts  and 4800 , no cat  tnx for reply

On Thu, 9 Apr 2020 at 6:21 pm, Ron Croucher via <> wrote:

On Thu, 9 Apr 2020 at 7:07 am, <wh6ebs@...> wrote:
I have a K3 with KIO3B (USB) upgrade. Connects direct to RPI, Raspbian Stretch. Audio connects via “AUDIO CODEC”. Rig control is CAT using Hamlib, port /dev/ttyUSB0 or some such. Plug in the USB and hunt in /dev for the device.

This also worked with the FTDI USB/RS232 cable before I upgraded the K3, but I had to also use a Griffin iMic to handle the audio.

Fully functional with WSJT-X and Fldigi.


Join to automatically receive all group messages.