1. Elecraft-K3@groups.io

Re: P3 and Yeasu 5000

Rob Sherwood
 

I setup a P3 to work with an R-4C.  The IF of 5645 kHz was already preprogrammed into the P3.  It works with a lot of IF frequencies, not just the K3 IF.  Rob, NC0B


On Jan 15, 2020, at 2:32 PM, Ed Pflueger <ab4iq@...> wrote:



Well the IF out of the 5000 is 9mhz I believe and you can change the P3 to 9mhz and yes I am looking at p25 of the P3 manual and it says using the P3 with other transceivers and how to set it up.  I do use the P3 with my K2, K3S’s and K3 but I haven’t tried another manufactures rig set up.

 

Ed.. AB4IQ

 

From: Elecraft-K3@groups.io [mailto:Elecraft-K3@groups.io] On Behalf Of Drew Vonada-Smith K3PA
Sent: Wednesday, January 15, 2020 3:26 PM
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] P3 and Yeasu 5000

 

Page 25 of which manual?

Do you mean an Elecraft Panadaptor?  A panadaptor (generally) works on the IF output of a radio.  The K3 and FT5k have different IF frequencies.  The P3 is not compatible.

73,

Drew K3PA
Join Elecraft-K3@groups.io to automatically receive all group messages.