Re: CW Noise Pedestal

Rob Sherwood

N0QO and I found the issue on transmit and reported it to Wayne.  I didn’t know there was an issue on receive.  Rob, NC0B

On Jan 13, 2020, at 1:35 PM, wb6bee <wb6bee@...> wrote:

Hi Drew

This is on a K3s, so it should have the modification (unless there is a component/solder failure)

On the comment, I was going off the description on the Elecraft site  pasted in below:

Early K3S/100 and K3/100 with KSYN3A boards. Modification to reduce receiver noise generated by fans. Included on all new K3S radios.


KPAIO3MDKT Installation Instructions

Join to automatically receive all group messages.